Cluster XL is enabled using cpconfig
HA module not started
Make sure it is configured to start at boot based on cpconfig
Select option to "Enable cluster membership for this gateway"
If is says disable it is already enabled.
Also, make sure policy is installed that deems this box is a cluster member.
probably your gateway need a policy firewall where it say that he is part of a cluster too
Hi guys, error persists...
Any other suggestions??
During first time wizard did you check unit is a part of a cluster? what is the output of fw stat?
If you have done (checking unit is a part of a cluster) and you have configured a check point cluster object correctly on the management server with a security policy I suggest to open a tac issue or contact your local partner
have you checked if the coreXL configuration is the same on the cluster members?
if enabled or not, if the number of "fw instance" is equal between members.
I assume that both gateways are identical (appliances, corexl config, software versions etc) and you have configured gateways correctly as a cluster member at first time wizard, and also you have a regular gateway license. Run cpconfig command choose 'enable cluster membership for this gateway', exit from cpconfig menu and reboot the machine. Install policy gateways and then check the status again.
Retrieving data ...