AnsweredAssumed Answered

ICA portal in R80.10

Question asked by Vladimir Yakovlev Champion on May 15, 2018
Latest reply on May 16, 2018 by Dameon Welch-Abernathy

Apparently, there is a built-in ICA portal in R80.10, but I am having trouble making it work.


According to documentation:

To enable the ICA Management tool: 

[Expert@HostName]# cpca_client [-d] set_mgmt_tool on [-a "administrator DN" | -u "user DN"] 


  • -d - (optional) enables debug for this operation (output is printed on the terminal)
  • on - sets the status of the ICA Management Tool 
  • -a "administrator DN" | -u "user DN" - (optional) sets the DN of the authorized administrator ('-a' flag) or DN of the authorized user ('-u' flag) permitted to use the ICA Management tool (must specify the full DN as appears in SmartDashboard in administrator/user properties - on 'Certificates' pane - in the 'DN:' field)

Note: Having port 18265 open is not a vulnerability. The Management Tool Portal is secured and protected by SSL. In addition, only authorized administrators are allowed to access it using a certificate.


But I do not see the 'Certificates' pane not in the Smart console (where I can issue a cert for the user, but it does not contain DN:


Nor in SmartDashboard, where admins are not shown at all:


If someone was able to successfully do this, please chime in with pointers.


Thank you,