AnsweredAssumed Answered

bgp dual-peering

Question asked by Yury Anoshyn on Apr 23, 2018
Latest reply on Apr 25, 2018 by Sundeep Mudgal

Hello all.

 

Gaia R80.10 .

 

i have prepare schema with interconecting VSX VS1 with two Nexus via eBGP .
VSX VS1 has IP1 , Nexus1 - IP2 , Nexus2 - IP3. At nexus side is AS 65010, at Checkpoint side is AS 65020.

Settings for both peers same.

 

session between VSX VS1 and nexus1 session state = established.
session between VSX VS1 and nexus2 session state = Active( flaps with Connect)

 

Why second session is not up?

 

in checkpoint advanced routing guide r.80.10 i see : "Dual Peering. This option enables the connection to the Local ASN or the Peer Local ASN. There can be only one active connection. If you do not enable this option, it is only possible to connect to the Peer Local ASN. "

 

Is it my case ? did i need switch this options on ?  

 

when i try change config i have error messages :

set bgp external remote-as 65010 peer IP3 peer-local-as dual-peering on -------- > BGP: Peer Local AS is not enabled on this peer.
set bgp external remote-as 65010 peer IP3 peer-local-as as 65020 on -------- > RTGRTG0019 BGP: Peer Local AS cannot be equal to the Local AS.
set bgp external remote-as 65010 peer IP3 peer-local-as as 65010 on -------- > RTGRTG0019 BGP: Peer Local AS cannot be equal to the remote peer's AS.

 

Where i'm wrong ????

 

With regards, Yury.

Outcomes