AnsweredAssumed Answered

Changing management interface when using pppoe

Question asked by Xavier Bensemhoun on Apr 18, 2018
Latest reply on Apr 22, 2018 by Maarten Sjouw

Hi all,

 

We have an issue preparing some of our Security Gateways: when we have to use pppoe.

For the context: we use to unset default configuration of Mgmt interface (192.168.1.1) and use the Internet interface as the management interface (> show management interface); so that host name (> show host names) of the firewall as to be the public IP address.

The issue is: we cannot change management interface for the pppoeX interface by this error message:

ourFirewall> set management interface pppoe1
MgmtErr9999  Interface "pppoe1" cannot be set as Management Interface. Management Interface must have an IP address

 

The configuration of the pppoe client id 1 is:

ourFirewall> show pppoe client id 1
        Client ID:1
        Client Name:pppoe1
        Client User Name:user@isp.blabla
        Client Password Hash:*************
        Client Interface:eth5
        Use Peer As Default Gateway:on
        Use Peer DNS:on
        Use Fake Peer Address:off
        Fake Peer Address:0.0.0.0
        Client Status:Connected 

 

For those who are not aware of such things :

  1. changing management interface (> set management interface ethX) will automatically adapt the host name entry of the firewall
  2. unset the Mgmt default configuration before changing the management interface will delete the hot name entry of the firewall ... and will cause the issue described in sk98977 'cpstart' command does not start Check Point services

 

Does anyone know such problematic ?

We use R77.30, last Jumbo HF

Outcomes