As per sk115392 for R80.10 the ISO Take should be maximum R80.10 GA (Take 421) with JHF Take_56.
So does this mean that If I'm using ISO image of R80.10 Take462 - CPLogToSyslog cannot be supported?
From my lab It works with T462.
But per sk115392 it support only till Take_421 ISO.
Due to the Take_462 ISO, the CPToSyslog process is getting terminated frequently.
Hence was checking if Take_462 can support.
Not sure for reference document. I tested only on my lab.
According to sk115392, you should ask TAC for a version of CPLogToSyslog supporting R80.10 Take_421 ISO + Jumbo 70 or 91 !
I had tested that with ISO Take_462, but JHF_Take_56 or Take_42 not supported.
Hence trying with JHF_Take_70.
Probably CheckPoint might release ISO_Take_462 supporting with JHF_Take_70 or above.
> Probably CheckPoint might release ISO_Take_462 supporting with JHF_Take_70 or above.
It is very unclear to me what you do expect - in sk115392 you can download the CPLogToSyslog tool for a number of different versions, and if you need it for another version you will have to ask CP TAC.
A new log exporting tool has been released. This tool will be replacing CPLogToSyslog.
You can find all relevant details in Logs Exporter - Check Point Logs Export.
Retrieving data ...