can anyone explain me in simple way
There are two ways to configure routes: via the WebUI (reachable at https://firewall-ip) or via CLI (reachable via console cable or SSH to gateway).
For example, if I want to establish the "next hop" for the 192.168.1.0/24 network as 10.0.0.254:
set static-route 192.168.1.0/24 nexthop gateway address 10.0.0.254 on
Or in the WebUI:
I strongly recommend reading the R80.10 Gaia Administration Guide for more information.
If you want to do Dynamic Routing, then also read the R80.10 Gaia Advanced Routing Administration Guide.
Retrieving data ...