I am using the 750 appliance and have issues using VPN from within the local network. Any help is very much appreciated.
So the config is very basic. One network (and port) for wired (trusted) LAN (192.168.1.x) and one network (and port) for wireless (untrusted) LAN (192.168.2.x). The idea is that it is not allowed to connect from 2.x to 1.x. This work just fine.
However, secure clients that have Check Point Mobile installed should be able to connect from the wireless (untrusted) LAN to the wired (trusted) LAN using VPN.
For this the Incoming, Internal and VPN traffic has a #1 rule 'VPN Remote Access - * Any - * Any - Accept' defined. This however does not work out. The VPN client is dropped every few seconds and there is no way to connect to any of the 1.x addresses.
Any ideas on how to solve this are welcome.