AnsweredAssumed Answered

ConnectControl / Logical Servers within same subnet

Question asked by Sascha Bremshey on Feb 5, 2019
Latest reply on Feb 13, 2019 by Dameon Welch-Abernathy


currenty I'm experimenting with Logical Servers.

So far it works fine but there is one point on my list I'm unable to resolve.


I need to access my logical server from inside the same subnet as the VIP and the real servers.


I managed to set up proxy arp so reqests are forwardet from GW to destination server(s).
Packets are recevived from server(s) but as the src. address is located in the same subnet the replays are send to src directly.

Aswer packets arrive at the client but with real server IP and not VIP -> packets did not pass trough GW so no reverse NAT happend.

To resolve this I think I only have to src-NAT all my connections if they are from same subnet to an IP which is behind Gateway (from servers view)

BUT as ConnectControl is only a more inteligent destination NAT method working as impied rule (0) my src.Nat rules will never match.


Thank you for reading :-)