could you please tel me if we can do this upgrade since the management server
if yes could you please give me the link for help
Since the management server what?
Didn't you already ask about this? upgrade R76SP.30 to R76SP.50
The upgrade guide is here: 60000/40000 Security Platforms R76SP.50 Upgrade Guide
yes i see the guide but for example this construction to upgrade
Note - Make sure to run the script from Chassis A and not Chassis B. ( how can i be sure )# cd /home/admin/temp/# ./AsgInstallScript –b chassis2
Monitoring commands (eg asg stat/asg monitor) tell you which chassis/sgm you're logged into.
In fact the easiest way is to just look at the command prompt: there will be a chassis id and SGM id appended to the hostname, e.g. ch01-01 for Chassis 1 SGM1.
in my case i have two chassis managed by one VIP IP adresse : so when i logged to the FW
i logged always in ch01-01:0:ACTIVE
how can i do to logged in ch02-01:0:
There are several ways. The recommended way to do an upgrade is via console (direct console to an SGM on each chassis).
1. Fail over chassis so that 2 is active. When you ssh to the mgmt IP, you will connect to chassis 2. Do the reverse for connecting to chassis 1. See "Configuring chassis state" in the admin guide for the commands.
2. Assign a UIPC to chassis 2. This way each chassis has its own mgmt. IP address. See admin guide on configuring UIPC.
You can always connect to another SGM using the "blade" command. However this is not recommended for an upgrade.
Retrieving data ...