i would link to connect check point VPN from ubuntu
Can u please suggest how to configure in Ubuntu how to access the VPN checkpoint.
In the future, please use a more descriptive subject for your posts.
I edited the subject of both ports previously called "Check Point 730."
In general, your options for VPN clients on Linux are SNX or L2TP.
Some discussion not specific to the 730 is here: VPN client for ubuntu
See this SK: How to establish Client-to-Site VPN from Linux machine to locally managed SMB appliance
hi no need to configure in Command mode right in terminal ?
Can please send the steps
normally we will give VPN ip address and user name password to the WIndows and mac machine to access the Firewall.
Believe you will find the steps in the links Dameon provided. Try those and let us know how you progress.
How do can we deal with TLS1.2 issues?
In VPN client for ubuntu @Victor Chang mentions build 800008016 for TLS1.2 support. How do we get that?
If you're using the CLI version of SNX, only that specific client (which doesn't support TLS 1.2) is available for download.
You may be able to get an updated version with TLS 1.2 support from the TAC.
Actually, just saw that the one available from the SNX page of the gateway itself is an updated version. In my case, I got 800008061.
Or you could do that
Check and install pre-requisites documented in sk65210
Download SNX from https://<your-gateway>/CSHELL/snx_install.sh or older version here.
Add the port as needed.
Install it as explained in sk90240
Enable SNX in the VPN page of the Web Portal (locally managed) or SmartConsole gateway object (central management).
Connect as shown in sk116576
Retrieving data ...