I have a two ISP connected to a 1490 gateway.
Is there a chance to configure sk25152 on SMB gateway?
I already tried it like described but did not work.
ISP Redundancy is supported on SMB appliance, but the monitoring mechanism is completely different.
Not sure what the equivalent is to $FWDIR/conf/cpisp_update is, assuming you can even edit it.
The file $FWDIR/conf/cpisp_update does not exist on SMB appliance. I have created this file and just put in a line to echo something in a log-filealso made chmod to 777 and chown to 150:80this did not work.I can't find documentation if any script runs when the ISP is switched.
You could potentially ask the TAC if there's an SMB analog to the SK you mention, but I suspect not.
Afaik, nothing comparable to $FWDIR/conf/cpisp_update is present on the SMB. What Maarten Sjouw wrote here is the current SMB mechanism for ISP redundancy.
On the embedded devices the ISP redundancy is built into the configuration of the box, just create 2 internet connections and in the internet connection configuration you also configure the monitoring, you can choose to ping addresses or probe DNS servers.Also the option to check loss of connection to the gateway is available.
You can choose these settings per internet connection.
Retrieving data ...