Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
sunilspj
Explorer
Jump to solution

VSX FW Logs not coming in Tracker of CMA as well as CLM

 VS0 has 257/tcp established connection for logging.

Tried FW reboot, CLM restart, no progress.

'fw log' command output on FW given below messages:-

22:50:38 ctl               >daemon sys_message::Error: FW-1 log formats problem.;product:VPN-1 & FireWall-1;product_family:Network

22:50:38 ctl               >daemon sys_message::Error: FW-1 failed to generate the log record.;product:VPN-1 & FireWall-1;product_family:Network

22:50:38 ctl               >daemon sys_message::Error: FW-1 log formats problem.;product:VPN-1 & FireWall-1;product_family:Network

 

Quick suggestions will be highly appreciated.

0 Kudos
1 Solution
5 Replies
sunilspj
Explorer
Thanks, it worked.
Now am getting logs in tracker.

But bad news is that after reboot, cluster status is Down for that modified FW.
"cphaprob list" showing problem for routed device.
[Expert@FW:0]# cphaprob list
Registered Devices:
Device Name: routed
Registration number: 3
Timeout: none
Current state: problem
Time since last report: 700.6 sec
0 Kudos
sunilspj
Explorer
Issue resolved, Dynamic routing configured in VS0 mistakenly.
0 Kudos
sunilspj
Explorer
VSX FW showing logs now but I have 1 VS (virtual FW) in it.
That VS is not showing any log, giving same log format error.
What can be done here for VS ?
0 Kudos
PhoneBoy
Admin
Admin
Best to get with the TAC here.
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events