Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Suguru_Kawahara
Contributor

Sending data to Check Point

Hi CheckMates,

I want to allow sending data to Check Point.
But I can not find the same settings as sk94509 for R77.30.
Please let me know this settings.

Best,

0 Kudos
4 Replies
PhoneBoy
Admin
Admin

The SK specifically shows instructions for R77.x below the steps for R80.x.
How far do you get in the steps before the trail goes cold?
A screenshot might be helpful.
0 Kudos
Suguru_Kawahara
Contributor

Hi,

 

Thanks for your reply.

The screenshot attached to that SK is old. R77.30 Management Server can not find the settings.

 

Best.

無題.png

0 Kudos
PhoneBoy
Admin
Admin

You are opening up the properties of your gateway object, not the Global Properties.
The screenshot in the SK shows where you would go if the Menu Bar were showing and it is accurate for R77.30.
Here's another way to find the Global Properties:

Screen Shot 2019-06-27 at 8.19.40 PM.png

0 Kudos
Suguru_Kawahara
Contributor

HI Phoneboy,

 

Thank you for giving me good advice.

 

Regards,

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events