Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Vincent_Bacher
Advisor
Advisor

R80.10 log server question

Hello Mates,

in R80.10 I am researching how to separate a policy management and log server into two several vmware hosts and manage/view both using one smartconsone session. In R77.30 I just configured the gateway to send logs to the log server and connected smartvew tracker to this server.

But in R80.10 I am not sure how to see the logs from the dedicated log server when connected to the policy management server with SmartConsole.

Maybe it's very easy and simple but I did not find a howto or sk about that scenario.

Any hint is appreciated.

Hopefully it's clear what I want to achieve  Smiley Happy

Cheers 

Vincent

and now to something completely different - CCVS, CCAS, CCTE, CCCS, CCSM elite
34 Replies
Vladimir
Champion
Champion

Vincent,

1. Install GAIA as Open Server from ISO on sufficiently large virtual HDD. Configure partitions to reflect anticipated utilization, when prompted.

2. During First Time Configuration Wizard, select "Security Management" only, and then "Log Server".

3. Create a Check Point host:

4. Go to its "Management" tab and select your logging functions:

4. Enter its Hostname and IP and initialize SIC:

5. Once SIC is initialized, verify that the gateway you are logging from is listed in host's "Logs" section and enable Indexing (this requires ample space on allocated virtual HDD and preferably four vCPU cores).

6. Open your gateway's properties and verify that the log server is the one selected there:

Cheers,

Vladimir

Vincent_Bacher
Advisor
Advisor

Hello Vladimir,

great, thanks a lot. This is what i had in mind as well.

And the "Logs & Monitor" section of the SmartConsole will then automatically Display logs from this dedicated Logserver, right? I want to disable logging on the Network Policy Management Server itself.

Fine, so this won't be very difficult Smiley Happy

Cheers

Vincent

and now to something completely different - CCVS, CCAS, CCTE, CCCS, CCSM elite
0 Kudos
G_W_Albrecht
Legend
Legend

There is also the need to license this new deployment to make it work. I think you will have to contact your sales rep for a log server management container and attach the Logging Blade there (or let Account Services do that).

CCSE CCTE CCSM SMB Specialist
0 Kudos
Vincent_Bacher
Advisor
Advisor

I think there is already a license for a secondary Management, so logging should be covered. Thanks Smiley Happy

and now to something completely different - CCVS, CCAS, CCTE, CCCS, CCSM elite
0 Kudos
G_W_Albrecht
Legend
Legend

Very good, then you are licensed already and only have to deal with the tech side 😉

CCSE CCTE CCSM SMB Specialist
0 Kudos
Vincent_Bacher
Advisor
Advisor

Cool. Licensing stuff is annoying

and now to something completely different - CCVS, CCAS, CCTE, CCCS, CCSM elite
G_W_Albrecht
Legend
Legend

Quite right you are - but still, these licenses do pay my cost of living, so they can not be bad altogether 😉

CCSE CCTE CCSM SMB Specialist
Vincent_Bacher
Advisor
Advisor

Licensing stuff pays nothing for me. I just do professional Services 😉

and now to something completely different - CCVS, CCAS, CCTE, CCCS, CCSM elite
0 Kudos
Vladimir
Champion
Champion

I believe that the discovery of the log server(s) by SmartConsole is happening in the background and the management server you are connecting to is aware of distributed functionality by means of SIC. Therefore logging and monitoring should be directed to additional log servers, SmartEvent servers and Log Correlation Units.

Guenther, can you verify this supposition?

0 Kudos
G_W_Albrecht
Legend
Legend

I would say that the Log Server(s), Smart Event Server and Log Correlation Units are defined in Dashboard. In SMS object, you see which GWs are currently logging to this SMS. Im GW object, you find the other options like local logging.

CCSE CCTE CCSM SMB Specialist
0 Kudos
Alastair_Haddix
Participant

Should I also select this setting for my management server to send logs to my dedicated log server? Could this be why I am not seeing logs from just my SmartConsole when logged into the management server?

0 Kudos
Alastair_Haddix
Participant

Currently no options for logging have been selected on our Management server.

0 Kudos
Vladimir
Champion
Champion

Your dedicated log server should be defined as a target in all other Check Point components you want o log to it.

In case of the management server, this should forward the audit logs. Normal traffic logs should be sent from the gateways.

What is the target for the logs on your gateway(s)?

0 Kudos
Alastair_Haddix
Participant

Target of our logs for the cluster and individual members are sending to our log server.

0 Kudos
Alejandro_Mont1
Collaborator

When you launch SmartConsole to the management server and click on the Logs pane, by default logs from all devices with the Logging blade enabled will be displayed, no additional action is necessary. On the right side there will be an option to see logs only from specific log servers if you wanted to drill down. Note that this option will not appear unless you have more than 1 device with the logging blade enabled in your environment.

In my experience there can occasionally be an error stating a log server is disconnected even though all devices are up in environments with multiple servers. (sk119912).

Vincent_Bacher
Advisor
Advisor

This is exactly what I wanted do be clarified.

Thank you very much Alejandro. *thumpsup*

and now to something completely different - CCVS, CCAS, CCTE, CCCS, CCSM elite
0 Kudos
Vincent_Bacher
Advisor
Advisor

And there will be just one log server. Ahe policy management server log server will be disabled.

and now to something completely different - CCVS, CCAS, CCTE, CCCS, CCSM elite
0 Kudos
Alejandro_Mont1
Collaborator

I'd recommend leave the logging blade enabled if possible even though it won't be in use. Even if your firewalls aren't logging to it there are some logging activities written (policy install history, dashboard login/logouts) on the management server that are important. You also have the option to configure the gateways to log back to the management server in case the log server goes down by keeping the blade enabled. I do know that log indexing needs to stay on (sk119335). It wouldn't surprise me that it would be a requirement to keep the blade enabled on a management server but you'd have to look through admin guides to confirm. Just building my case here that I wouldn't disable the blade if possible, I've seen that "Log server is disconnected" error a million times (search support center) and I try not to tinker with what works:)

Vincent_Bacher
Advisor
Advisor

Good point, you're right. I think it will be best to let it enabled and configure the gateways to log to mgt in case of log server outage.

Thanks for pointing me to that.

and now to something completely different - CCVS, CCAS, CCTE, CCCS, CCSM elite
0 Kudos
AlekseiShelepov
Advisor

I did the following setup for our environment, where we have two MDS in different datacenters. Logs are sent to both servers all the time. So in case of any outage/unavailability of the primary server we would have all logs on the secondary, but not only from the time when firewalls discovered that the main server is not reachable.

As it is R77.30 version, I enabled log indexing (SmartLog) only on the secondary server, to save some hardware resources on the primary. If I choose to open SmartLog from a drop-down menu at the top of SmartConsole it will connect me to the secondary server right away.

And I totally support you with the very good option for Vincent Bacher to leave logging blade enabled on the main management server, and use at as a backup option in case when the separate log server is unavailable.

Alastair_Haddix
Participant

We setup our environment like this when we migrated to R80.10. However when we try to view the logs from our management we get the error "Requested object not found". If I try to open a log file then errors with "Log server is disconnected". I know our log server is working properly because we are receiving logs and are able to view them with opening a second SmartConsole and login, but we would like to only have to log into a single SmartConsole instance. 

0 Kudos
Vladimir
Champion
Champion

It looks like you’ve setup your second log server as a new management server. In this case, it will become its own CA and will require independent logon.

You should rerun first time installation wizard, configure Gaia as a management Secondary, create a Checkpoint Host object, select “log server” blade on it and configure communication SIC.

Alastair_Haddix
Participant

Thank you Vladimir. By rerunning the first time installation wizard will I still retain all stored logs?

0 Kudos
Vladimir
Champion
Champion

I am not certain. Please backup the logs before proceeding and take a snapshot for good measure.

Make doubly sure that the server you are resetting is NOT actually managing any gateways.

Vladimir Yakovlev

973.558.2738

vlad@eversecgroup.com

0 Kudos
Alastair_Haddix
Participant

I will do this definitely. Is there anyway that you know of how to validate that our log server was setup as new management server that would establish it as a CA?

0 Kudos
PhoneBoy
Admin
Admin

Log into it with SmartConsole.

If you can define rulebases and network objects, then it's a management server.

0 Kudos
Alastair_Haddix
Participant

Thank you Dameon. I do not have any options to add objects or define rulebases only access to the Logs & Monitors tab. Looks like our log server was setup correctly then. Now I am at a loss.

Vladimir
Champion
Champion

Alastair,

Please check if the Log Indexing is enabled on all of your log servers:

0 Kudos
Vladimir
Champion
Champion

Check out pages 3-7 in this document: https://community.checkpoint.com/docs/DOC-2333  where I have outlined the multi-site and multi-server architecture, you may find it handy even if it does not match your environment.

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events