Document related to OPSEC configuration

[Sangeeth_N]

I am in search for a document related to OPSEC configuration in checkpoint to integrate with 3rd party SIEM tools. Kindly share documents if any.

[Kosin_Usuwanthi]

Maybe you can search from 3rd SIEM that you need to integrate with CheckPoint.

Like this.

IBM Knowledge Center 

[Mark_Mitchell]

Hi Sangeeth,

Are you after anything in particular? As the options you select on the OPSEC configuration may differ per product.

Or are you after a quick how to setup an OPSEC configuration?

As Kosin Usuwanthim‌ has advised the 3rd party should have a guide on how to integrate their product with Check Point.

Regards

Mark

[Sangeeth_N]

Hi Mark

Yes, we are using ArcSight. 

But the actual issue that we are facing is that "User" field is shown as "Confidential" in logs (Clear connection is configured).

I also gone through sk101570 (3rd Scenario) which is related to our issue. I hope by following the given procedure will solve this issue. Kindly suggest...

Reference : sk101570 

Some fields in logs on 3rd party LEA OPSEC client show "*** Confidential ***" 

[Mark_Mitchell]

Hi Sangeeth, 

Within your OPSEC configuration do you have the LEA configuration settings set to "Hide all confidential log fields"?  This will cause what you are seeing. 

if you can post your OPSEC configuration we can take a look and advise as necessary. 

Regards

Mark

[Sangeeth_N]

Hi Mark

As stated in earlier comment , the connection type configured is "clear" in ArcSight. I believe that we need not to create an OPSEC application for clear connection.

Regards

Sangeeth

[Bob_Bent]

Sounds like you're on the right track as far as the LEA options. Let us know how it works out for you.

• change to sslca as Mark Mitchell shows
• set the variable LEA_CLEAR_DISABLE_CONFIDENTIALITY as shown in sk101570

[Sangeeth_N]

Hi Bob

I had performed the same :

• set the variable LEA_CLEAR_DISABLE_CONFIDENTIALITY as shown in sk101570

But the issue is still persisting. "Target User Name " filed in logs received in ArcSight  is still showing as ***confidential ***.

More over the Management Server is running on GAIA Windows OS R77.30.

Dameon Welch-Abernathy‌  Kindly suggest.

[PhoneBoy]

I suggest a TAC case.

How To Open a Case with TAC and/or Account Services‌

[Danny]

OPSEC on CheckMates

OPSEC Partners with Solution Brief

OPSEC on Check Point

[PhoneBoy]

Maybe use Log Exporter instead?

Log Exporter guide‌

[shubhama]

Log Exporter is used only in R80.* version and not in R77 or below version . 

Please correct me if i am wrong . 

[PhoneBoy]

You can get Log Exporter for R77.30, but R77.30 and earlier releases are End of Support.