- Products
- Learn
- Local User Groups
- Partners
-
More
Join Us for CPX 360
23-24 February 2021
Important certificate update to CloudGuard Controller, CME,
and Azure HA Security Gateways
How to Remediate Endpoint & VPN
Issues (in versions E81.10 or earlier)
IDC Spotlight -
Uplevel The SOC
Important! R80 and R80.10
End Of Support around the corner (May 2021)
Hi,
I was hoping someone may know how to remove bootp settings from a decommissioned vlan interface:
testing> set bootp interface bond2.500 primary 10.10.10.129 wait-time 0 off
CLINFR0329 Invalid command:'set bootp interface bond2.500 primary 10.10.10.129 wait-time 0 off '.
Running R80.30 kernel 2.6 cluster with JHA take 111
Yes, I can remove these settings by logging in to the web UI, navigating to dhcp relay, selecting the entry tagged as missing it's interface and then remove it. I would however very much prefer a cli method...
Steps to reproduce
Configure new interface:
add interface bond2 vlan 500
set interface bond2 state on
set interface bond2.500 comments "Site - Service"
set interface bond2.500 state on
set interface bond2.500 ipv4-address 10.10.10.130 mask-length 25
set bootp interface bond2.500 on
set bootp interface bond2.500 relay-to 192.168.1.2 on
set bootp interface bond2.500 relay-to 192.168.2.2 on
set bootp interface bond2.500 relay-to 192.168.3.2 on
set bootp interface bond2.500 primary 10.10.10.129
Attempting to remove everything:
set bootp interface bond2.500 relay-to 192.168.1.2 off
set bootp interface bond2.500 relay-to 192.168.2.2 off
set bootp interface bond2.500 relay-to 192.168.3.2 off
set bootp interface bond2.500 off
set interface bond2.500 state off
delete interface bond2.500 ipv4-address
delete interface bond2 vlan 500
Items remaining in configuration:
set bootp interface bond2.500 primary 10.10.10.129
set bootp interface bond2.500 off
Regards
David Herselman
You can remove all configuration (DHCP, IGMP, IPs, ...) by adding "force" after delete command.
delete interface bond2 vlan 500 force
@David_Herselman wrote:Items remaining in configuration:
set bootp interface bond2.500 primary 10.10.10.129
set bootp interface bond2.500 off
Hi
set bootp interface <interface> primary default
seems to remove it
You can remove all configuration (DHCP, IGMP, IPs, ...) by adding "force" after delete command.
delete interface bond2 vlan 500 force
About CheckMates
Learn Check Point
Advanced Learning
WELCOME TO THE FUTURE OF CYBER SECURITY