Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Krishna
Participant

Post-Encrypt traffic is not visible in Fw monitor. Other end FW is not receiving traffic sent by me

Below are the logs collected from the primary gateway of my firewall. In "O" the source IP is getting NATed to the NAT IP and then pre-encrypt is shown and not receiving the POST-encrpt packet.The other end firewall is not observing any traffic.

 

 

[vs_0][fw_2] eth1:i[60]: 10.140.96.6 -> 10.232.144.14 (TCP) len=60 id=42611
TCP: 40768 -> 515 .S.... seq=24587d9c ack=00000000
[vs_0][fw_2] eth1:I[60]: 10.140.96.6 -> 10.232.144.14 (TCP) len=60 id=42611
TCP: 40768 -> 515 .S.... seq=24587d9c ack=00000000
[vs_0][fw_2] eth0:o[60]: 10.140.96.6 -> 10.232.144.14 (TCP) len=60 id=42611
TCP: 40768 -> 515 .S.... seq=24587d9c ack=00000000
[vs_0][fw_2] eth0:O[60]: 10.40.112.6 -> 10.232.144.14 (TCP) len=60 id=42611
TCP: 40768 -> 515 .S.... seq=24587d9c ack=00000000
[vs_0][fw_2] eth0:e[60]: 10.40.112.6 -> 10.232.144.14 (TCP) len=60 id=42611
TCP: 40768 -> 515 .S.... seq=24587d9c ack=00000000

0 Kudos
3 Replies
This widget could not be displayed.