I am working to bring the ospf, Look like it is throwing Auth error all the time. I doubt at the checkpoint side I am missing something.
What could be the issue ? It is a new setup and there are no SmartDash Board Server Installed at the moment. Plan was to make the OSPF Connectivity. At the moment there are no initial rules at this Firewall. So accepting all traffic.
Debug log from cisco Side ( which is other side of the ospf neighbor ).
Jun 23 10:52:42.860 AST-Sum: OSPF-1 ADJ Vl2573: Rcv pkt from 10.7.248.26 : Mismatched Authentication key - ID 3.
Cisco Side OSPF Config
interface Vlan2573
description XXXXXXXXXXXXXX
ip address 10.7.248.25 255.255.255.252
ip ospf authentication message-digest
ip ospf message-digest-key 3 md5 7 XXXXXXXX
| User | Count |
|---|---|
| 13 | |
| 11 | |
| 8 | |
| 6 | |
| 5 | |
| 5 | |
| 5 | |
| 3 | |
| 3 | |
| 3 |
Thu 02 May 2024 @ 04:00 PM (CEST)
CheckMates Live DACH - Keine Kompromisse - Sicheres SD-WANThu 02 May 2024 @ 05:00 PM (CEST)
SASE Masters: Deploying Harmony SASE for a 6,000-Strong Workforce in a Single Weekend
