Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
LostBoY
Advisor

NTP Configuration on a VSX Cluster

Jump to solution

Hello,

I am running R80.10 VSX Cluster on 2 Gateways in Active/Standby, need to configure NTP on the Gateways and Management Server. My Question is : - what is the correct procedure to configure NTP and will it impact cluster configuration ? will it require downtime ? 

Thanks

0 Kudos
1 Solution

Accepted Solutions
Jerry
Leader
Leader

no just use GAIA for Gateway and set NTP servers accordingly (make sure you've got routes towards those NTP hosts, either external or internal).

you can also do that from clish but that require some syntax:

set ntp active on
set ntp server primary xxxx version 4
set ntp server secondary xxxx version 4
save config

that's all 🙂

Jerry

View solution in original post

4 Replies
Jerry
Leader
Leader

no just use GAIA for Gateway and set NTP servers accordingly (make sure you've got routes towards those NTP hosts, either external or internal).

you can also do that from clish but that require some syntax:

set ntp active on
set ntp server primary xxxx version 4
set ntp server secondary xxxx version 4
save config

that's all 🙂

Jerry

View solution in original post

Jerry
Leader
Leader
sorry, forgot to add - no downtime will be encountered at all!
time is precious so ... use it wisely 🙂
Jerry
0 Kudos
Maarten_Sjouw
Champion
Champion
Make sure to match the version with your servers, nowadays v3 or v4 are mostly in use and don't forget:
set ntp active on
Regards, Maarten
LostBoY
Advisor
Thanks 🙂
0 Kudos