Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Dan_Currens
Participant

Mismatch in the number of CoreXL FW instances on new 3800 cluster, but no mismatch can be found.

Jump to solution

Two 3800 gateways running in a cluster on R80.40 Jumbo 125.

Node "A" in the cluster /var/log/messages full of:

fwk: CLUS-114802-2: State change: DOWN -> STANDBY | Reason: There is already an ACTIVE member in the cluster (member 1)
fwk: CLUS-113900-2: State change: STANDBY -> DOWN | Reason: Mismatch in the number of CoreXL FW instances has been detected

The cluster will not failover to this node.

Tried forcing the number of CoreXL instances to 6 in CPCONFIG and rebooting.

Tried removing nodes from cluster and re-adding.

Any suggestions?

 

Cluster does show as a healthy cluster in cphaprob stat:

Cluster Mode: High Availability (Active Up) with IGMP Membership

ID Unique Address Assigned Load State Name

1 192.168.142.6 100% ACTIVE windICSfw1B
2 (local) 192.168.142.5 0% STANDBY windICSfw1A

Active PNOTEs: None

Last member state change event:
Event Code: CLUS-114802
State change: DOWN -> STANDBY
Reason for state change: There is already an ACTIVE member in the cluster (member 1)
Event time: Thu Jan 13 09:36:39 2022

Last cluster failover event:
Transition to new ACTIVE: Member 2 -> Member 1
Reason: Mismatch in the number of CoreXL FW instances has been detected
Event time: Tue Jan 11 14:19:18 2022

Cluster failover count:
Failover counter: 3007

[Expert@windICSfw1A:0]# grep -c ^processor /proc/cpuinfo
8

[Expert@windICSfw1B:0]# grep -c ^processor /proc/cpuinfo
8

[Expert@windICSfw1A:0]# fw ctl affinity -l -r -a
CPU 0: Mgmt
CPU 1: fw_5
mpdaemon fwd cprid lpd pepd rad rtmd wsdnsd in.asessiond vpnd usrchkd in.acapd cprid cpd
CPU 2: fw_3
mpdaemon fwd cprid lpd pepd rad rtmd wsdnsd in.asessiond vpnd usrchkd in.acapd cprid cpd
CPU 3: fw_1
mpdaemon fwd cprid lpd pepd rad rtmd wsdnsd in.asessiond vpnd usrchkd in.acapd cprid cpd
CPU 4:
CPU 5: fw_4
mpdaemon fwd cprid lpd pepd rad rtmd wsdnsd in.asessiond vpnd usrchkd in.acapd cprid cpd
CPU 6: fw_2
mpdaemon fwd cprid lpd pepd rad rtmd wsdnsd in.asessiond vpnd usrchkd in.acapd cprid cpd
CPU 7: fw_0
mpdaemon fwd cprid lpd pepd rad rtmd wsdnsd in.asessiond vpnd usrchkd in.acapd cprid cpd
All:
Interface eth5: has multi queue enabled
Interface eth1: has multi queue enabled
Interface eth2: has multi queue enabled

[Expert@windICSfw1B:0]# fw ctl affinity -l -r -a
CPU 0: Mgmt
CPU 1: fw_5
mpdaemon fwd cprid lpd vpnd rad rtmd wsdnsd pepd in.asessiond usrchkd in.acapd cprid cpd
CPU 2: fw_3
mpdaemon fwd cprid lpd vpnd rad rtmd wsdnsd pepd in.asessiond usrchkd in.acapd cprid cpd
CPU 3: fw_1
mpdaemon fwd cprid lpd vpnd rad rtmd wsdnsd pepd in.asessiond usrchkd in.acapd cprid cpd
CPU 4:
CPU 5: fw_4
mpdaemon fwd cprid lpd vpnd rad rtmd wsdnsd pepd in.asessiond usrchkd in.acapd cprid cpd
CPU 6: fw_2
mpdaemon fwd cprid lpd vpnd rad rtmd wsdnsd pepd in.asessiond usrchkd in.acapd cprid cpd
CPU 7: fw_0
mpdaemon fwd cprid lpd vpnd rad rtmd wsdnsd pepd in.asessiond usrchkd in.acapd cprid cpd
All:
Interface eth5: has multi queue enabled
Interface eth1: has multi queue enabled
Interface eth2: has multi queue enabled

License looks correct CPSG-C-8-U

0 Kudos
6 Replies
This widget could not be displayed.