Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Christian_Koehl
Contributor

Internet access via VPN to 3rd party firewall

Jump to solution

Dear Checkmates,

I need to build a VPN  between an internat Check Point Firewall R80.30 and a 3rd party firewall located on the internet edge.

This 3rd party firewall is the main internet access point.

 

Any hints, especially regarding the Enc-Dom and "route-based VPN vs policy based VPN".

 

Thanks alot and best regards,

Christian

0 Kudos
1 Solution

Accepted Solutions
PhoneBoy
Admin
Admin

You probably need to use a route-based VPN since you're basically using an encryption domain of "everything" in this case.
Again, exactly how this would be set up depends on the third party endpoint in question.

View solution in original post

0 Kudos
3 Replies
PhoneBoy
Admin
Admin

Looking at this diagram, it's not clear exactly what the purpose of this VPN is.
Exactly what traffic are you trying to encrypt?

0 Kudos
Christian_Koehl
Contributor

It is an internal network area for external users and there system (systems not owned by the customer) -- like a "guest network". The guests should get "direct" internet access and there communication has to be tunneled through the customer network.

0 Kudos
PhoneBoy
Admin
Admin

You probably need to use a route-based VPN since you're basically using an encryption domain of "everything" in this case.
Again, exactly how this would be set up depends on the third party endpoint in question.

View solution in original post

0 Kudos