Hello,
I am facing a strange issue when I try to enable SNMP v3 read-only on my cluster gateways. I have two 6600 gateways in a cluster running R81. I have tried twice to enable SNMP ver3 over the Gaia portal, and both times when I press aply I got disconnected from the Gaia portal without any changes made. Investigating further, I noticed that both times I got cluster failover with the following status:
CP-2> cphaprob state
Cluster Mode: High Availability (Active Up) with IGMP Membership
ID Unique Address Assigned Load State Name
1 10.xxx.xxx.6 0% STANDBY CP-1
2 (local) 10.xxx.xxx.7 100% ACTIVE CP-2
Active PNOTEs: None
Last member state change event:
Event Code: CLUS-114704
State change: STANDBY -> ACTIVE
Reason for state change: No other ACTIVE members have been found in the cl uster
Event time: Thu Apr 1 22:33:50 2021
Last cluster failover event:
Transition to new ACTIVE: Member 1 -> Member 2
Reason: ROUTED PNOTE
Event time: Thu Apr 1 22:33:50 2021
Cluster failover count:
Failover counter: 3
Time of counter reset: Fri Mar 26 10:54:34 2021 (reboot)
So I got this Routed Pnote message and cluster failover every time I try to enable SNMP v3. I have OSPF enabled cluster and OSPF peering to Cisco Nexus switches and Cisco 4431 routers. Maybe someone can give me some advice, how to solve this issue?
