Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
praveend
Explorer
Jump to solution

After standby SIC initialized CLUSTERXL showing down

its working setup - using ClusterXL Active/Standby mode .

Standby SIC was down

i reinitialized  SIC after that on the SMS i can see both Gateways are up - But ClusterXL is down .

i started HA service - cphastart

Sync interface connection

FW1----eth1-03------eth1-03------FW2

FW1-Eth1-03  - ipaddress 1.1.1.1/30

FW2-Eth1-03  - ipaddress 1.1.1.2/30

 

After SIC initialized do i require any re-configuration for the ClusterXL .

when i did tcpdump on sync interface i can see that ARP is not resolving

arp who-has 1.1.1.1 tell 1.1.1.2 same for the FW2 also .

am not able to ping both sync ip address from respective Firewalls .

on the working/production Firewall i can see below output

Output of the cphaprob -a if command shows "Inbound: UP , Outbound: DOWN"

as per SK65560   communication issue related to outside , but switch side every think seems to good .

 

Do i need to do any more configuration or steps .

 

Thanks ,

 

 

0 Kudos
11 Replies
This widget could not be displayed.

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events