Hello all,
I have an issue on freshly installed 15600, where this gateway does not detect the 2-port 40GbE module. The code release I am running is R77.30 Build 503.
gw-4370e6> fw ver
This is Check Point's software version R77.30 - Build 503
gw-4370e6> show asset network
Number of line cards: 2
Line card 1 type: 4 ports 10GbE SFP+ Rev 1.0
Line card 2 type: 8 ports 1GbE RJ45 Rev 1.0
[Expert@gw-4370e6:0]# rpm -q kernel
kernel-2.6.18-92cp_990180014
[Expert@gw-4370e6:0]# ifconfig -a | grep eth
eth1-01 Link encap:Ethernet HWaddr 00:1C:7F:63:71:C0
eth1-02 Link encap:Ethernet HWaddr 00:1C:7F:63:71:C1
eth1-03 Link encap:Ethernet HWaddr 00:1C:7F:63:71:C2
eth1-04 Link encap:Ethernet HWaddr 00:1C:7F:63:71:C3
eth2-01 Link encap:Ethernet HWaddr 00:1C:7F:68:85:D6
eth2-02 Link encap:Ethernet HWaddr 00:1C:7F:68:85:D7
eth2-03 Link encap:Ethernet HWaddr 00:1C:7F:68:85:D8
eth2-04 Link encap:Ethernet HWaddr 00:1C:7F:68:85:D9
eth2-05 Link encap:Ethernet HWaddr 00:1C:7F:68:85:DA
eth2-06 Link encap:Ethernet HWaddr 00:1C:7F:68:85:DB
eth2-07 Link encap:Ethernet HWaddr 00:1C:7F:68:85:DC
eth2-08 Link encap:Ethernet HWaddr 00:1C:7F:68:85:DD
Looking at the PCI devices, in fact we can see that Mellanox is presented.
[Expert@gw-4370e6:0]# lspci | egrep -i --color 'network|ethernet'
04:00.0 Ethernet controller: Mellanox Technologies MT27620 Family
04:00.1 Ethernet controller: Mellanox Technologies MT27620 Family
07:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03)
08:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03)
87:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
87:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
88:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
88:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
8b:00.0 Ethernet controller: Intel Corporation 82580 Gigabit Network Connection (rev 01)
8b:00.1 Ethernet controller: Intel Corporation 82580 Gigabit Network Connection (rev 01)
8b:00.2 Ethernet controller: Intel Corporation 82580 Gigabit Network Connection (rev 01)
8b:00.3 Ethernet controller: Intel Corporation 82580 Gigabit Network Connection (rev 01)
8c:00.0 Ethernet controller: Intel Corporation 82580 Gigabit Network Connection (rev 01)
8c:00.1 Ethernet controller: Intel Corporation 82580 Gigabit Network Connection (rev 01)
8c:00.2 Ethernet controller: Intel Corporation 82580 Gigabit Network Connection (rev 01)
8c:00.3 Ethernet controller: Intel Corporation 82580 Gigabit Network Connection (rev 01)
When I ran the HW network giagnostic I could saw that it tests eth3-01 and eth3-02 with while test as passed. Seems to me like a driver issue at the moment.
This gateway was installed from
Check_Point_R77.30_for_15000_23000_Appliances.iso md5sum:cea76d21c5adc38a0459329110a922b4
Any advice would be appreciated.
