Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
andymong
Participant
Jump to solution

is it possible /supported to run fw ctl zdebug on scalable platform? (chassis)

I can't seem to find any documentation regarding this. sk100808 doesnot include R80.20SP, apparently.

0 Kudos
1 Solution

Accepted Solutions
Timothy_Hall
Champion
Champion

On Scalable Platforms use command fw ctl zdebug -m fw + drop if executing it from gclish, otherwise from expert
mode use command g_fw ctl zdebug -m fw + drop. Note that Scalable Platforms also have a special command called
asg_drop_monitor, that can show real-time packet drops occurring for other capacity reasons such as drops at the NIC
hardware level and CoreXL queuing drops.

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com

View solution in original post

3 Replies
Vincent_Bacher
Advisor
Advisor

just tested it on a vs at a 61k running R80.20SP and it seems to work.

and now to something completely different - CCVS, CCAS, CCTE, CCCS, CCSM elite
0 Kudos
Timothy_Hall
Champion
Champion

On Scalable Platforms use command fw ctl zdebug -m fw + drop if executing it from gclish, otherwise from expert
mode use command g_fw ctl zdebug -m fw + drop. Note that Scalable Platforms also have a special command called
asg_drop_monitor, that can show real-time packet drops occurring for other capacity reasons such as drops at the NIC
hardware level and CoreXL queuing drops.

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com
andymong
Participant

Thank you very much! asg_drop_monitor has been deprecated. It is now just drop-monitor instead . 

0 Kudos