Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted

ICAP client on R80.20 and 3rd DLP Server Symantec

Hello  all, anyone could share a configuration example about using R80.20 as a client ICAP for a Web Prevent Symantec DLP Server?

when I Trying the gateway doesn´t understand a message to block came from DLP server.

Thanks.

 

Regards.

 

8 Replies
Highlighted
Admin
Admin

I believe our initial support around ICAP was developed specifically for Symantec DLP.
It would help to understand what steps you've taken to configure it.
Highlighted

Hello Dameon, do you have a configuration (example) to share? I have a DLP server Symantec WEB Prevent version 15.x,  SMS R80.20 M2 and two gateways r80.20 take 33 using Cluster high availability,

 

When my DLP server respond an ICAP request message from my gateway (in REQMOD) the body message came with a html format explain the block ocurred and my gateway does not show the page. I tried change the parameter to show block message or not show block message... but didn´t work.

**parameter user_check_interaction_name is correct.

 

 # vi icap_client_blade_configuration.C

(
:enabled ("true")
:filter_http_method (
: (
:method ("POST")
)
)
:http_services (
: (
😛ort (8080)
)
)
:inspect_html_response ("true")
:user_check_interaction_name ("Bloqueio de Aplicativo")
:trickling_mode (0)
:log_level (1)
:icap_servers (
: (
:name ("DLP_Symantec")
:ip ("10.100.1.190")
:ip6 ("")
😛ort (1344)
:service ("reqmod")
😛roto ("icap")
:modification_mode ("reqmod")
:transp ("3rd_cpas")
:failmode (open)
:timeout (61)
:max_conns (100)
:user_check_action (2)
:x_headers (
:x_client_ip ("true")
:x_server_ip ("true")
:x_authenticated_user ("true")
:authentication_source ("Local")
😛ase64_username_encode ("true")
)
)
)
:rules_type ("include")
:network_filter_rules_ip4 (
: (
:src_ip_ranges (
: (
:min_ip ("10.100.41.105")
:max_ip ("10.100.41.106")
)
)
:dst_ip_ranges (
: (
:min_ip ("any")
:max_ip ("any")
)
)
)
)
:network_filter_rules_ip6 (
: (
:src_ip_ranges (
: (
:min_ip ("")
:max_ip ("")
)
)
:dst_ip_ranges (
: (
:min_ip ("")
:max_ip ("")
)
)
)
)
)

Thanks 

Highlighted
Admin
Admin

I don't have sample configurations, I just know from prior conversations with R&D where previous versions of this feature came from 🙂
I recommend engaging with the TAC on this as I do see a couple support tickets on this (but on earlier releases).
Highlighted

ok, thank you.

Highlighted

Hi @Alessandro_Marr 

ask @Thomas Werner 

He is an expert in TE and ICAP questions.

Tags (1)
Explorer

did u succeed in setting up successfully?
Highlighted

yes, using r80.20 take 74

0 Kudos