cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post
Highlighted

ICAP client on R80.20 and 3rd DLP Server Symantec

Hello  all, anyone could share a configuration example about using R80.20 as a client ICAP for a Web Prevent Symantec DLP Server?

when I Trying the gateway doesn´t understand a message to block came from DLP server.

Thanks.

 

Regards.

 

8 Replies
Highlighted
Admin
Admin

Re: ICAP client on R80.20 and 3rd DLP Server Symantec

I believe our initial support around ICAP was developed specifically for Symantec DLP.
It would help to understand what steps you've taken to configure it.
Highlighted

Re: ICAP client on R80.20 and 3rd DLP Server Symantec

Hello Dameon, do you have a configuration (example) to share? I have a DLP server Symantec WEB Prevent version 15.x,  SMS R80.20 M2 and two gateways r80.20 take 33 using Cluster high availability,

 

When my DLP server respond an ICAP request message from my gateway (in REQMOD) the body message came with a html format explain the block ocurred and my gateway does not show the page. I tried change the parameter to show block message or not show block message... but didn´t work.

**parameter user_check_interaction_name is correct.

 

 # vi icap_client_blade_configuration.C

(
:enabled ("true")
:filter_http_method (
: (
:method ("POST")
)
)
:http_services (
: (
😛ort (8080)
)
)
:inspect_html_response ("true")
:user_check_interaction_name ("Bloqueio de Aplicativo")
:trickling_mode (0)
:log_level (1)
:icap_servers (
: (
:name ("DLP_Symantec")
:ip ("10.100.1.190")
:ip6 ("")
😛ort (1344)
:service ("reqmod")
😛roto ("icap")
:modification_mode ("reqmod")
:transp ("3rd_cpas")
:failmode (open)
:timeout (61)
:max_conns (100)
:user_check_action (2)
:x_headers (
:x_client_ip ("true")
:x_server_ip ("true")
:x_authenticated_user ("true")
:authentication_source ("Local")
😛ase64_username_encode ("true")
)
)
)
:rules_type ("include")
:network_filter_rules_ip4 (
: (
:src_ip_ranges (
: (
:min_ip ("10.100.41.105")
:max_ip ("10.100.41.106")
)
)
:dst_ip_ranges (
: (
:min_ip ("any")
:max_ip ("any")
)
)
)
)
:network_filter_rules_ip6 (
: (
:src_ip_ranges (
: (
:min_ip ("")
:max_ip ("")
)
)
:dst_ip_ranges (
: (
:min_ip ("")
:max_ip ("")
)
)
)
)
)

Thanks 

Highlighted
Admin
Admin

Re: ICAP client on R80.20 and 3rd DLP Server Symantec

I don't have sample configurations, I just know from prior conversations with R&D where previous versions of this feature came from 🙂
I recommend engaging with the TAC on this as I do see a couple support tickets on this (but on earlier releases).
Highlighted

Re: ICAP client on R80.20 and 3rd DLP Server Symantec

ok, thank you.

Highlighted

Re: ICAP client on R80.20 and 3rd DLP Server Symantec

Hi @Alessandro_Marr 

ask @Thomas Werner 

He is an expert in TE and ICAP questions.

Tags (1)

Re: ICAP client on R80.20 and 3rd DLP Server Symantec

Highlighted

Re: ICAP client on R80.20 and 3rd DLP Server Symantec

did u succeed in setting up successfully?
Highlighted

Re: ICAP client on R80.20 and 3rd DLP Server Symantec

yes, using r80.20 take 74

0 Kudos