cancel
Showing results for 
Search instead for 
Did you mean: 
Post a Question

Use LAN Port for WAN on Check Point 730

hi we have check point 730 appliance in that we have only one port Wan can we convert Lan to WAN port .?

6 Replies
Admin
Admin

Re: check point 730

First, please use the correct space to ask, which in this case, is SMB and SMP

In the latest firmware (R77.20.81), you can use LAN ports as WAN ports.

You may also use the DMZ port as a WAN port as well, which does not require a specific firmware version.

0 Kudos

Re: check point 730

Can u please provide me the steps ?

0 Kudos

Re: check point 730

After you upgrade, these options shown in the Admin Guide: Managing the Device Internet section will be available.

Admin
Admin

Re: check point 730

If you just want to use the DMZ port as an Internet connection:


0 Kudos

Re: check point 730

i have 3 connection nearly 50 users 

1st connection connected to Airtel ILL to the WAN

2 port connected to spectra net to DMZ 100 mbps

3 port connected to usb LAN  ACT line 150 mbps  but i am not able to that much speed from usb lan

so i thought to be connect with lan as WAN

Can u please suggest. 

0 Kudos
Admin
Admin

Re: check point 730

Before you can use a LAN port as a WAN port it must be unassigned from a switch.

Edit the Local Network switch and untick the box next to the LAN port you wish to use as a WAN.

You can then select that port as an option when creating a new Internet connection.

0 Kudos