cancel
Showing results for 
Search instead for 
Did you mean: 
Post a Question

Tried to connect to serial console on 600/700 appliance however the display is garbled. My terminal is set to 9600 8 n 1 XON/XOFF

Any one experience this problems with the 600 or 700 appliance.

0 Kudos
2 Replies
Admin
Admin

Re: Tried to connect to serial console on 600/700 appliance however the display is garbled. My terminal is set to 9600 8 n 1 XON/XOFF

Because 9600 is not the correct baud rate for the serial console on the 600/700 appliances, it is 115200.

Serial console connection configuration for Check Point appliances 

0 Kudos

Re: Tried to connect to serial console on 600/700 appliance however the display is garbled. My terminal is set to 9600 8 n 1 XON/XOFF

Just some additional comments: it is possible to modify the speed to 9600 and some people do it. However, using the default speed of 115200 makes the terminal much better!!!

0 Kudos