Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Sebastian_Wagne
Explorer

SMB Gateway HA ISP NAT

I have a two ISP connected to a 1490 gateway.

Is there a chance to configure sk25152 on SMB gateway?

I already tried it like described but did not work.

0 Kudos
5 Replies
PhoneBoy
Admin
Admin

ISP Redundancy is supported on SMB appliance, but the monitoring mechanism is completely different.

Not sure what the equivalent is to $FWDIR/conf/cpisp_update is, assuming you can even edit it.

0 Kudos
Sebastian_Wagne
Explorer

The file $FWDIR/conf/cpisp_update does not exist on SMB appliance. I have created this file and just put in a line to echo something in a log-file
also made chmod to 777 and chown to 150:80
this did not work.
I can't find documentation if any script runs when the ISP is switched.

0 Kudos
PhoneBoy
Admin
Admin

You could potentially ask the TAC if there's an SMB analog to the SK you mention, but I suspect not. 

0 Kudos
G_W_Albrecht
Legend
Legend

Afaik, nothing comparable to $FWDIR/conf/cpisp_update is present on the SMB. What Maarten Sjouw wrote here is the current SMB mechanism for ISP redundancy.

CCSE CCTE CCSM SMB Specialist
Maarten_Sjouw
Champion
Champion

On the embedded devices the ISP redundancy is built into the configuration of the box, just create 2 internet connections and in the internet connection configuration you also configure the monitoring, you can choose to ping addresses or probe DNS servers.Also the option to check loss of connection to the gateway is available.

You can choose these settings per internet connection.

Regards, Maarten
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events