cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post
Highlighted

Question on ClusterXL

Jump to solution

Hi,

When configuring ClusterXL, do I need to have an IP pool of 3 IPs from the ISP for the external port configuration? 

1 for WAn of gateway 1 

1 for WAn of gateway 2

1 for VIP.

If my ISP has only given me one IPthen how will I configure IP of external interfaces + VIP?

0 Kudos
1 Solution

Accepted Solutions
Highlighted

Re: Question on ClusterXL

Jump to solution

Here is how you can configure one public IP address on cluster of usual appliances (not SMB):

Configuring Cluster Addresses on Different Subnets

View solution in original post

0 Kudos
6 Replies
Highlighted
Platinum

Re: Question on ClusterXL

Jump to solution
unless you'll be using proxy-arp or VMAC setup on ClusterXL for public facing "IP sharing" ...
Jerry
Highlighted

Re: Question on ClusterXL

Jump to solution
Do you really have a SMB appliance cluster ? Afaik, locally managed SMB clusters can have a VMAC configured in Advanced Settings, so you can use the one IP for it and have local addresses for the cluster nodes.
Highlighted

Re: Question on ClusterXL

Jump to solution

Hi,

We have a 5100 device.

 

0 Kudos
Highlighted

Re: Question on ClusterXL

Jump to solution
Just asked that because you posted the question in the SMB Appliances and SMP corner...
Highlighted
Admin
Admin

Re: Question on ClusterXL

Jump to solution
Well then let me move it to the right place 🙂
Highlighted

Re: Question on ClusterXL

Jump to solution

Here is how you can configure one public IP address on cluster of usual appliances (not SMB):

Configuring Cluster Addresses on Different Subnets

View solution in original post

0 Kudos