cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post
Highlighted
Nickel

OSPF on SMB 1490 Cluster

Jump to solution

Hi all,

we have a SMB 1490 centrally managed cluster and try to activate OSPF.
One one member it was successfully. As router-id we use the Clustered Address (192.168.7.66) on both members.

The second member with the same configuration doesn't want enable OSPF. I get the following output.

image.png

After "set ospf area backbone on" the file /etc/routed.conf doesn't get any update about OSPF.
The message "Host bits set in IP prefix 192.168.7.66/28" is a hint but I can't find any info what issue we have.

Anyone any idea?

Thx
David

 

 

Can someone point me please to the correct solution?

0 Kudos
2 Solutions

Accepted Solutions
Highlighted
Admin
Admin

Re: OSPF on SMB 1490 Cluster

Jump to solution
0 Kudos
Highlighted
Nickel

Re: OSPF on SMB 1490 Cluster

Jump to solution
Issue was a wrong key-id.
In embedded Gaia you can only view your actual OSPF Config via /etc/routed.conf.

View solution in original post

0 Kudos
2 Replies
Highlighted
Admin
Admin

Re: OSPF on SMB 1490 Cluster

Jump to solution
0 Kudos
Highlighted
Nickel

Re: OSPF on SMB 1490 Cluster

Jump to solution
Issue was a wrong key-id.
In embedded Gaia you can only view your actual OSPF Config via /etc/routed.conf.

View solution in original post

0 Kudos