Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
G_W_Albrecht
Legend
Legend
Jump to solution

Number of Users currently connected to SMB via RA VPN client

The sk102803 explains how you can see the number of users currently connected via Client-to-Site VPN on CLI of a Locally Managed 600/700/1100/1200R/1400 appliances.

  1. Connect over SSH to the Locally Managed appliance and log in to Expert mode.
  2. Run the following command:

 

# pep show user all

 

This will display a table containing all users which are currently connected with their corresponding IP addresses (in Hexadecimal format).

CCSE CCTE CCSM SMB Specialist
0 Kudos
1 Solution

Accepted Solutions
SSlater
Employee
Employee

I would say more specifically, that this command provides all identified users that are being enforced by Identity Awareness blade.

  - Identity Awareness will need to be configured for this to work as expected.

View solution in original post

0 Kudos
4 Replies
Vladimir_S
Contributor

Hello, 

I attempted to run "pep show user all", but out put was "daemon did not respond or not running!". Any suggestions?

0 Kudos
HristoGrigorov

@Vladimir_S Do you have IA blade enabled ?

0 Kudos
Vladimir_S
Contributor

Identity Awareness blade enabled, but not configured.

0 Kudos
SSlater
Employee
Employee

I would say more specifically, that this command provides all identified users that are being enforced by Identity Awareness blade.

  - Identity Awareness will need to be configured for this to work as expected.

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events