Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Platinum

ClusterXL questions

Hi,

I have two questions:

1. Cluster object -> General Properties -> IP Address. What is most appropriate to put here ? Just any of the many cluster IPs or one particular ? 

2. Has anyone successfully used VMAC on SMB in productive ? Any problems I should be aware of ? I like the idea behind VMAC but I found mentioned on the next that it is not implemented quite properly. 

0 Kudos
6 Replies
Highlighted
Admin
Admin

The IP must be reachable to the management station for sure.

External-facing is usually the one chosen.

0 Kudos
Highlighted
Platinum

Thanx. To be more specific I want to change that IP from say 192.168.0.253 to 192.168.0.254. I tried and it's telling me that some certificates needs to be regenerated and tell it needs to be done in "certificates tab". Where's this tab exactly ?

0 Kudos
Highlighted
Admin
Admin

It would be in the IPSec VPN section of the cluster object.

Also, the IP should be one of the cluster IPs configured (and not, say, a completely different IP).

0 Kudos
Highlighted
Platinum

Yes, that is the exact situation at the moment. Cluster IP is a completely different IP and I want to use one of the virtual IPs of the cluster LAN interfaces (the one that is in the same subnet as the management server).

Will there be any problems if I am using LAN cluster IP and not WAN ?

0 Kudos
Highlighted
Admin
Admin

As long as the management can reach that IP, it should be ok.

Highlighted
Platinum

Thanx, I have successfully changed IP address.

0 Kudos