Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Patrick_Tuttle1
Collaborator

1590 Upgrading Ques

Hello CheckMates;

 

We are evaluating the SMB 1500 (R80.20) and I went to test the upgrading method using smart update and realized I cannot find the tgz file only the img file. 

Is this method going away? or is it because the code is new that it takes a little while for it show up in tgz format ?

These devices would be rolled out in a SCADA environment without access to the internet so doing upgrades from the Manager would be preferable.

 

Thanks

-pat

0 Kudos
13 Replies
PhoneBoy
Admin
Admin

SmartUpdate can’t be used to update R80.x gateways (SMB or otherwise).
I know we are integrating CDT into SmartConsole as part of R80.40.
Not sure if this will allow firmware upgrades to the 1500 Series appliances or not.
0 Kudos
Barel_Tkach
Employee
Employee

@Patrick_Tuttle1  Thanks you for pointing it out. smartupdate package will be published soon on the latest version SK.

please make sure to use a supported management version.

0 Kudos
Patrick_Tuttle1
Collaborator

Thank you both for your responses. 

So,  it sounds like we can count on SmartUpdate being able to upgrade these in the future ?

 

-pat

0 Kudos
Barel_Tkach
Employee
Employee

Yes, and to be more accurate until we can offer an alternative.

Patrick_Tuttle1
Collaborator

I see there is now a .tgz file marked for smartupdate. I imported it but the 1590 does not see it in the provisioning profile. the profile sees the ones for the 1200r but not the r80.20.
0 Kudos
Patrick_Tuttle1
Collaborator

https://supportcenter.checkpoint.com/supportcenter/portal/role/supportcenterUser/page/default.psml/m...

 

Check Point 1500 Appliance package R80.20.01 build 992000872 for R80 SmartUpdate

 

 

0 Kudos
G_W_Albrecht
Legend
Legend

I think you are testing SmartProvisioning - according to sk163914: Cannot attach an LSM profile to a 1500 Branch Office Appliance (in SmartProvisioning) on M..., there are issues. But i found that just using SmartUpdate without LSM does work. When selected in the Packet Repository it will give the error "No suitable targets found" if Distribute or PreInstall Verifier are performed. But when the 1500 device itself is selected, "Distribute Package..." shows the added CP1500_6.0_4_0_-.tgz and installs it:

OperationDetails.png

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Operation Details are very deep indeed, reflecting the console output:

OperationDetails2.png

CCSE CCTE CCSM SMB Specialist
0 Kudos
Patrick_Tuttle1
Collaborator

Thanks for all the info.  Looks like more work needs to be done on Check Point's part for the LSM functionality. 

but I'll test this out.

Thanks very much

-pat

0 Kudos
Barel_Tkach
Employee
Employee

1500 devices support in LSM is not yet available.

It is expected as part of R80.40.

0 Kudos
Patrick_Tuttle1
Collaborator

Thanks, I think that was mentioned and I forgot. Too much multitasking....
0 Kudos
Patrick_Tuttle1
Collaborator

Hello Check Mates;

Haven't had time to lab up R80.40 yet but I don't see any support listed in the release notes for LSM for 1590's

Anyone been able to try this yet?

 

-pat

0 Kudos
Andreas_Aust
Collaborator

Hi Patrick,

LSM for 1590 in 80.40 is supported!
0 Kudos
Patrick_Tuttle1
Collaborator

That's GREAT! thanks for the quick reply.

-pat
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events