cancel
Showing results for 
Search instead for 
Did you mean: 
Post a Question

1490 + 4g modem does not work

Hello,

I am tring to use check point 1490 with 4g modem. The model of modem is Huawei E3372. As we can see in sk92809 it is supported. But when I connect it I see these logs:

2018 Oct 18 15:25:33 gw-b daemon.info dhclient: [DHCP] DHCPDISCOVER is sent on usbwan0 to 255.255.255.255 port 67 interval 14

2018 Oct 18 15:25:37 gw-b auth.err getty[21688]: bad speed: vt100^M 

2018 Oct 18 15:25:47 gw-b auth.err getty[21984]: bad speed: vt100^M 

2018 Oct 18 15:25:47 gw-b daemon.info dhclient: [DHCP] DHCPDISCOVER is sent on usbwan0 to 255.255.255.255 port 67 interval 19

2018 Oct 18 15:25:57 gw-b auth.err getty[22071]: bad speed: vt100^M 

It's obvious that the main problem is "bad speed". How can I change it?

0 Kudos
2 Replies
Admin
Admin

Re: 1490 + 4g modem does not work

First of all, are you on the firmware release specified by the SK (which is R77.20.80 or above)?

If you're on the correct version and still seeing that, I recommend opening a TAC case so we can investigate.

0 Kudos

Re: 1490 + 4g modem does not work

Are you sure you have configured all parts for the USB port correctly? Have you set the APN correctly for the telco, the user and password and also the dial string/phone number should be *99#

Regards, Maarten
0 Kudos