Management General Management Topics Logging and Reporting Multi-Domain Management Policy Management
- Local User Groups
AI & Machine Learning
I'm looking for an option to restrict VPN access only for laptops which are "domain members".
Is there a way to accomplish that? (All PCs/Part of them?)
Yes, there's an option in the Endpoint Security VPN client called "Secure Configuration Verification" (SCV).
One of the checks you can configure is "Verifies that the user logged into the operating system and is a member of specified Domain User Groups."
That should meet your specific requirement.
Note this only applies to Windows PCs as the Mac VPN client does not support these checks.
Two additional questions:
1. Does that require specific VPN client license/flavor?
2. How do I enforce that only this type of client can connect?
It requires the Endpoint Security VPN client, which requires a remote access VPN license for each user that connects.
In terms of our current Endpoint licenses, this includes:
However, other legacy licenses may include this .
If you have questions about this, reach out to your Check Point account team or Partner.
The procedure for enforcing that only that client can connect includes:
This should be covered in the documentation I linked previously.
Apparently SCV policy is a global property, and if the customer has more than one gateway or more different policies for different type of users it's not possible, at least I couldn't find any documentation on this and support guys didn't also.
Anyone who has any field experience with the SCV policy, please comment.
By group monitor, we can restrict allow only based on domain member.At endpoint side, the secure client is enough or i need to install endpoint security.
Can you please confirm below configuration for domain monitor in local.scv file.
:mismatchmessage ("You are using SecureClient with a non-authorized user.\nMake sure you are logged on as an authorized user.")
Other way of achieving your requirement (Only Domain users can connect remote VPN) is that you can enable Mobile access blade and create Native application for Domain check.
You need to enable Endpoint security scan check in Mobile access blade and create Native application for Domain check.
This is long process but it is very stable. I have enabled this scenario for one customer and it is working fine.
What I need to is to only allow domain users to connect to VPN who are using corporate machines. Mac and Linux machines would be great but I at least need to check the Windows machines which will be joined to our corporate domain.