cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post
Highlighted

I would like disable split tunneling for vpn

Jump to solution
I installed the client vpn check point mobile and I wish that the internet flows through the vpn
1 Solution

Accepted Solutions
Highlighted

Re: I would like disable split tunneling for vpn

Jump to solution

See sk111995: You have to set Hub Mode / Route all traffic to gateway in Global Properties -> Remote Access -> Endpoint Connect -> Route all traffic to gateway -> set to "Yes" 

View solution in original post

9 Replies
Highlighted

Re: I would like disable split tunneling for vpn

Jump to solution

See sk111995: You have to set Hub Mode / Route all traffic to gateway in Global Properties -> Remote Access -> Endpoint Connect -> Route all traffic to gateway -> set to "Yes" 

View solution in original post

Highlighted

Re: I would like disable split tunneling for vpn

Jump to solution

Yeah. That is correct what Gunther has suggested. It is best way.

Also you can try with enabling option "VPN Tunneling" on Endpoint client agent itself. but it is manual task.

If you are using SSL VPN with Mobile access blade then follow below procedure to route all traffic to gateway.

https://community.checkpoint.com/message/12386-mobile-access-default-route

Highlighted

Re: I would like disable split tunneling for vpn

Jump to solution

Hi,

checkpoint vpn tunneling greyed out ?  How do I get this ungreyed out ?

 

Highlighted

Re: I would like disable split tunneling for vpn

Jump to solution
It is grayed out when it is controlled by the gateway.
Regards, Maarten
Highlighted

Re: I would like disable split tunneling for vpn

Jump to solution

Hi Guys,

 

can somebody tell me how to change this on the endpoint? we would like to turn on split tunneling only for one endpoint for testing purposes without changing this for everybody via Global Properties.

 

Thank You,

Basilio Alcantara

Highlighted
Ivory

Re: I would like disable split tunneling for vpn

Jump to solution

Hi Omar,

 

Did you get any solution? I'm facing same issue in MacOS. For Windows I already saw some workarounds however not applicable for Mac.

Re: I would like disable split tunneling for vpn

Jump to solution

Hi,

Yes, you can this. Follow the below step:

Global Properties --> Remote Access --> Endpoint Connect --> Route all traffic to gateway --> set to "Yes" 

Highlighted

Re: I would like disable split tunneling for vpn

Jump to solution
I would like to modify it on the endpoint client for a machine manually , not on global properties since that will be a global change that affects all firewalls hosting remote acccess.
0 Kudos
Highlighted
Employee++
Employee++

Re: I would like disable split tunneling for vpn

Jump to solution

Global Properties - Remote Access End Pont Connect select the following option.

Route All Traffic to GW: Configured on endpoint client

Capture.PNG