Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 

R80.40 Policy install fail

In R80.40 management I have found a small glitch in verification:

When you push a APCL/URLF policy (inline layer) to a gateway, without APCL/URLF blades turned on, the verification does not stop the Policy install process with an error, it just hangs at 50%.

It shows as if it still busy but even after an hour it did not move. In my case it is on a MDS and the only way to recover is by rebooting the MDS. Stopping/starting the Domain does not help.

You cannot try to install again as it tells you there is a policy install in progress.

When the blades are turned on on the same gateway the policy pushes just fine (after a reboot).

Regards, Maarten
5 Replies
Highlighted
Admin
Admin

The verifier should definitely catch that.

@Tomer_Noy  can you have someone take a look?

0 Kudos
Highlighted
Employee+
Employee+

Thanks @PhoneBoy .

I spoke with the relevant owners earlier today to take a look and reply once we know more.

0 Kudos
Highlighted

I opened a case and sent @PhoneBoy the number
Regards, Maarten
0 Kudos
Highlighted

Hi @Maarten_Sjouw 

I tried reproducing the issue on a clean environment, and wasn't able, 

Can you please share the SR with me privately so I can take a look on all the details? 

 

0 Kudos
Highlighted

Today I created a new VS and installed the policy again without enabling the blades, guess what, it is stuck again at 50%.
Regards, Maarten
0 Kudos