cancel
Showing results for 
Search instead for 
Did you mean: 
Post a Question

I would like disable split tunneling for vpn

Jump to solution
I installed the client vpn check point mobile and I wish that the internet flows through the vpn
1 Solution

Accepted Solutions

Re: I would like disable split tunneling for vpn

Jump to solution

See sk111995: You have to set Hub Mode / Route all traffic to gateway in Global Properties -> Remote Access -> Endpoint Connect -> Route all traffic to gateway -> set to "Yes" 

4 Replies

Re: I would like disable split tunneling for vpn

Jump to solution

See sk111995: You have to set Hub Mode / Route all traffic to gateway in Global Properties -> Remote Access -> Endpoint Connect -> Route all traffic to gateway -> set to "Yes" 

Re: I would like disable split tunneling for vpn

Jump to solution

Yeah. That is correct what Gunther has suggested. It is best way.

Also you can try with enabling option "VPN Tunneling" on Endpoint client agent itself. but it is manual task.

If you are using SSL VPN with Mobile access blade then follow below procedure to route all traffic to gateway.

https://community.checkpoint.com/message/12386-mobile-access-default-route

Re: I would like disable split tunneling for vpn

Jump to solution

Hi,

checkpoint vpn tunneling greyed out ?  How do I get this ungreyed out ?

 

0 Kudos

Re: I would like disable split tunneling for vpn

Jump to solution
It is grayed out when it is controlled by the gateway.
Regards, Maarten