Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Yohan_Vaisseau
Explorer
Jump to solution

I would like disable split tunneling for vpn

I installed the client vpn check point mobile and I wish that the internet flows through the vpn
1 Solution

Accepted Solutions
G_W_Albrecht
Legend
Legend

See sk111995: You have to set Hub Mode / Route all traffic to gateway in Global Properties -> Remote Access -> Endpoint Connect -> Route all traffic to gateway -> set to "Yes" 

CCSE CCTE CCSM SMB Specialist

View solution in original post

10 Replies
G_W_Albrecht
Legend
Legend

See sk111995: You have to set Hub Mode / Route all traffic to gateway in Global Properties -> Remote Access -> Endpoint Connect -> Route all traffic to gateway -> set to "Yes" 

CCSE CCTE CCSM SMB Specialist
Gaurav_Pandya
Advisor

Yeah. That is correct what Gunther has suggested. It is best way.

Also you can try with enabling option "VPN Tunneling" on Endpoint client agent itself. but it is manual task.

If you are using SSL VPN with Mobile access blade then follow below procedure to route all traffic to gateway.

https://community.checkpoint.com/message/12386-mobile-access-default-route

Omar_Khalif
Participant

Hi,

checkpoint vpn tunneling greyed out ?  How do I get this ungreyed out ?

 

Maarten_Sjouw
Champion
Champion
It is grayed out when it is controlled by the gateway.
Regards, Maarten
Basilio_Alcant1
Contributor

Hi Guys,

 

can somebody tell me how to change this on the endpoint? we would like to turn on split tunneling only for one endpoint for testing purposes without changing this for everybody via Global Properties.

 

Thank You,

Basilio Alcantara

marimcuri
Explorer

Hi Omar,

 

Did you get any solution? I'm facing same issue in MacOS. For Windows I already saw some workarounds however not applicable for Mac.

Yatiraj_Panchal
Contributor

Hi,

Yes, you can this. Follow the below step:

Global Properties --> Remote Access --> Endpoint Connect --> Route all traffic to gateway --> set to "Yes" 

Basilio_Alcant1
Contributor
I would like to modify it on the endpoint client for a machine manually , not on global properties since that will be a global change that affects all firewalls hosting remote acccess.
0 Kudos
Lari_Luoma
Ambassador Ambassador
Ambassador

Global Properties - Remote Access End Pont Connect select the following option.

Route All Traffic to GW: Configured on endpoint client

Capture.PNG

 

Alex_Alborzfard
Contributor

After enabling this, can't access anything outside, only internal. Do we need to enable NAT for the Office Mode subnet, in order to be able access outside?

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events