Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer

Intra bond traffic

Jump to solution

Hi all,

 

Apologies, im new to this checkpoint device. We had existing set up, 2 bonds

EndpointA in bond 1 under sub interface

EndpointB in bond2 under sub interface

 

is the route auto created once I set IP on the sub interface? Do I need to create policy or rules for EndpointB to talk EndpointA?

 

 

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Admin
Admin
Once you assign the IP/netmask for the interface, the interface route should be created.
You will need to modify the topology.on the gateway object accordingly and ensure there is an Access Policy rule the permits the desired communication.

View solution in original post

0 Kudos
1 Reply
Highlighted
Admin
Admin
Once you assign the IP/netmask for the interface, the interface route should be created.
You will need to modify the topology.on the gateway object accordingly and ensure there is an Access Policy rule the permits the desired communication.

View solution in original post

0 Kudos