Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Vaako
Explorer

Configure two different VPNs with 2 external interfaces R80.30

Hi, community!

 

Could you help me with my problem. I need to create two different VPNs with two external interfaces.

1 VPN:

- internal network: 10.0.0.0/24

- external interface: eth1 - 1.1.1.1/30

- remote peer: 2.2.2.2

- remote network: 192.168.100.0/24

 

2 VPN:

- internal network: 172.17.0.0/24

- external interface: eth1 - 3.3.3.3/28

- remote peer: 4.4.4.4

- remote network: 192.168.200.0/24

 

I use 2 x CP-5200 (R80.30) with ClusterXL. I don`t use any routing protocols. How can I implement this task?

I found this guide, but I don`t know how to do this in R80.30(https://downloads.checkpoint.com/fileserver/SOURCE/direct/ID/12114/FILE/How-To-Setup-a-site-to-site-...)

Or I need to use Route Based VPN?

0 Kudos
2 Replies
PhoneBoy
Admin
Admin

You would have to implement this with VSX as it's currently not possible to use a different Link Selection IP for different VPN communities on the same gateway.
Massinissa
Explorer

Hello, 

Is it possible to configure two different VPNs with 2 external interfaces on the same GW R80.40 non VSX ?

Thank you in advance

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events