Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Murat_TURAN
Participant
Jump to solution

We can't install Dell PowerEdge R740

We have a problem starting installation.  What mean, Unable to load the System Description Tables? After this message system going to shot down and restart. 

0 Kudos
1 Solution

Accepted Solutions
mdjmcnally
Advisor

From what can find then refers to BIOS.

Is the system set to use UEFI or BIOS.  Looking at HP Servers then needs to be BIOS and disable Processor X2APIC Support, Disable HyperThreading

Make sure that using either R80.20 3.10 Kernel or R80.30 3.10 Kernel ISO as those what supported.

Going to be settings in the BIOS/UEFI however other then that then cannot tell you more.

 

 

View solution in original post

10 Replies
PhoneBoy
Admin
Admin
What specific image are you using to install it with?
It is only supported with R80.20 and above as a management server.
I suspect it will also work with the R80.20/R80.30 3.10 images.
0 Kudos
Murat_TURAN
Participant

We try two different ISO, 77.30 and 80.30

Check_Point_R80.30_T200_Security_Gateway.iso and Check_Point_R77.30_Install_and_Upgrade_T5.Gaia.iso

0 Kudos
Murat_TURAN
Participant

Dell PowerEdge R740 installation problem. 

0 Kudos
mdjmcnally
Advisor

If you look on the HCL 

https://www.checkpoint.com/support-services/hcl/

Then the R740 is supported

 

Capture.PNG

Will see is R80.20 and R80.30 with 3.10 kernel and the R80.20 MR1, R80.20 and R80.30 for Management

Your Video shows an R80.10 installation attempt

0 Kudos
Murat_TURAN
Participant

Yes i know. I try all of them. 77.30, 80.30, 80.10, 77.10 same problem each of versions. 

"unable to load the system description tables"

0 Kudos
mdjmcnally
Advisor

From what can find then refers to BIOS.

Is the system set to use UEFI or BIOS.  Looking at HP Servers then needs to be BIOS and disable Processor X2APIC Support, Disable HyperThreading

Make sure that using either R80.20 3.10 Kernel or R80.30 3.10 Kernel ISO as those what supported.

Going to be settings in the BIOS/UEFI however other then that then cannot tell you more.

 

 

Murat_TURAN
Participant

I'll try. Thank you.

0 Kudos
BharathKumarG
Explorer

I have applied the above settings still when I enter Install GAIA it keeps on rebooting. 

0 Kudos
frankcar
Contributor

Hi,

is your raid adapter you have in box one of the ones listed on the hcl site

https://www.checkpoint.com/support-services/hcl/poweredge-r740/

curious to know what adapter you do have if the issue still exist ?

as we have two server we want to use R81.10 on for management only and raid adapter we are not sure what we got till unit come in.

Thanks

 

0 Kudos
frankcar
Contributor

r80.10 not supported on that kit also and r77.30 for management only r80.30 with correct raid card.

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events