Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Haidar_Al-Mouss
Participant
Jump to solution

Upgrade process from R76 to R77.30

Hello,
We are looking at upgrading our existing Checkpoint 2 x 4800 Firewalls from R76 to R77.30.
I've written steps for the process and I would appreciate it if you can advise please since I've never done an upgrade on CP begore.

Before upgrade process I will create a snapshot Image of both FWs to roll back in case things don't go according to plan.


Steps for upgrading:

1- On Standby CP 

Gaia > Software Updates > Status and Actions > Select R77.30 Fresh Installand Upgrade from R75.4x/R75.40VS/R76

2- Go through Installation process

3- Reboot

4- Continue with installation process if there is

All the above work was done on the Standby. Now, on the active CP:

1- Run cphastop to swap between Active and Standby

2- Check that Standby with R77.30 is now the Active FW

3- Follow the same process on above on the new Standby R76 FW

Many thanks,

H

0 Kudos
8 Replies
This widget could not be displayed.

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events