Have a need where we're working on a Management server which manages a handful of 1595 devices and another set of 6000 appliances. We have a separate policy for the 1595 devices that I need to reset the hit count on all of the rules as we're monitoring rule traffic. I've found two SKs that seem applicable but I was surprised resetting hit count involved stopping services and running sql commands.
SK's found:
sk111162 - How to reset the Hit Count
sk111832 - How to reset Hit Count for a specific rule
Few questions:
1. Is there not an easier way through Smart Console?
2. Doing SK111162 would reset hit counts on all policies, not just my 1595 device policy, correct? No way to target just the one policy?
3. Trying to understand SK111162, do I need to do the top part and touch all my 1595 devices (which involves doing a cpstop... so not super feasible at this point) or is it enough to just run the management server section if these are all centrally managed?
4. One other idea was to change the hit count in Global Properties to disabled, let it sit a day and then re-enable. Would that have a similar effect? I know it would also impact all policies but just thinking of alternative methods.
Thanks!