Howdy Check Mates. I have a simple single site, single MHO140 setup with two SGMs. This was working perfectly fine and we had to move IPs. The way the ISP is currently setup is we take a single IP address via DHCP which is statically reserved on their side. Then they route our publicly routable IPs to us via that IP.
All is up including the SMO and traffic is flowing appropriately. However, my second SGM is never able to join the SMO. When I drag it and drop it asg monitor reports detached. The only thing we did other than changing from static to dynamic is to click the "kernel routes" option under the "routing options" in the SMO in order to get our default route. But that is in the SMO so all configuration from the SMO should get picked up by each individual SGM. Meaning the configuration should not be different.
As I move SGM02 in and out of the SMO I watch on the console. All looks fine when taking it out, but upon bring it back in this is as far as I get:
[Expert@gw-bf2c60:0]# Setting GW to be SGM 1_2 in security-group 1
Shutting start_linker: [ OK ]
That is is. Nothing else happens. If I wait a while I can eventually log in with the default un/pw and there is no config done on the box. There is no more output, there is no reboot. Auto-clone is on and the FTW information is set appropriately in the orchestrator.
[Global] sgo-ch01-01> show smo image auto-clone state
Image auto-clone state is on
I am running 81.10 with JHF 81. Has anyone ever seen this functionality before or do I need to open a ticket?
Thanks in advance.