cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post
Highlighted

5200 standaloe HA SmartEvent gray

Jump to solution

5200 device upgrade to R80.10, after upgrade i found i can't enable SmartEvent due to this icon is gray,

i checked official document, this document mention 5400 model can not be enable SmartEvent but no 5200 model

what should i do to enable SmartEvent blade?

0 Kudos
1 Solution

Accepted Solutions

Re: 5200 standaloe HA SmartEvent gray

Jump to solution

I believe that you will not be able to enable SmartEvent on it because it is a standalone deployment and because it is only 5200 appliance. I wouldn't recommend running even simple standalone configuration on most of appliances, and you plan to enable also SmartEvent there.

Admin guide says:

In a standalone deployment, log indexing is disabled by default. Enable log indexing only if the standalone computer CPU has 4 or more cores.

5200 appliance has 1 physical CPU with 2 cores. Also, you found confirmation about 5400 appliance, 5200 is a bit less powerful.

2 Replies

Re: 5200 standaloe HA SmartEvent gray

Jump to solution

I believe that you will not be able to enable SmartEvent on it because it is a standalone deployment and because it is only 5200 appliance. I wouldn't recommend running even simple standalone configuration on most of appliances, and you plan to enable also SmartEvent there.

Admin guide says:

In a standalone deployment, log indexing is disabled by default. Enable log indexing only if the standalone computer CPU has 4 or more cores.

5200 appliance has 1 physical CPU with 2 cores. Also, you found confirmation about 5400 appliance, 5200 is a bit less powerful.

Re: 5200 standaloe HA SmartEvent gray

Jump to solution

thanks for your suggestion.

 

0 Kudos