Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Andy_N
Contributor
Jump to solution

Configuring checkpoint as mail relay using MTA

We have currently setup our R80.10 Cluster as an MTA to receive external mail.

Reason is filtering span and viruses.  

We set up MTA as described on picture.

MX record has been changed to our CP external IP (87.245.x.x).

We tried sending test email via telnet with no luck. No response from server.

Which additional steps should be performed (security rules,  NAT rules) to configure CP properly?

 

Regards

0 Kudos
1 Solution

Accepted Solutions
Andy_N
Contributor

The problem was solved.

Actually it is not possible use MTA on virtual IP (proxy ARP address) – only on physical IP interface address.

View solution in original post

0 Kudos
3 Replies
G_W_Albrecht
Legend
Legend

Did you follow the Threat Prevention Administration Guide R80.10 p.52 f ? Your screenshot does not look like you did so 🤔

CCSE CCTE CCSM SMB Specialist
0 Kudos
Andy_N
Contributor

Yes, we did.

 

Check box implement rule is selected

 

We not using TLS

0 Kudos
Andy_N
Contributor

The problem was solved.

Actually it is not possible use MTA on virtual IP (proxy ARP address) – only on physical IP interface address.

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events