cancel
Showing results for 
Search instead for 
Did you mean: 
Create a Post
General Topics

Have a question and you can't figure out where to post about it after reading All Products and Where to Post About Them? Post it here!

kobilevi
kobilevi inside General Topics 5m ago
views 22 2

smartconsole 80.30 is crashing

helloi install the last version of smartconsole on my computer, my gaia server is installed on vmwork stationafter the installation and compalte the wizard in the web interface the system will reboted and  comes on.. but i lost the connection to the server -the web interface still up, but i cannot ping to the server from my computer - smartconsole is too dont work ping to my computer from the server is fine.. someone know what is the problem?   
SUPPORT_RINGO_C
SUPPORT_RINGO_C inside General Topics 49m ago
views 1666 9 1

centrally manage a DAIP gateway

Hello Teams,My environment:I have a SmarCenter on R80.10 with public ip address, and want to centrally manage a natted 3000 series R80.10 gateway (is behind natting device router).My question:How should i create the gw object without knowing in advance its ip ? And succeed SIC communication ?Is there any method that suits for such cases ?Thanks in advance.
kb1
kb1 inside General Topics 3 hours ago
views 15

Question regarding export of firewall configuration.

Is there a way to export the full Check Point firewall configuration in a machine readable format (text, CSV, JSON, HTML etc.)?  For example we can see the firewall interface table within the SmartConsole application but can not copy or export the data.  The same for the routing table.  We can export some of the network objects but not the Network groups. Using R80.20 on the mgmt servers.Regards.
Stefano_Chiesa
Stefano_Chiesa inside General Topics 6 hours ago
views 47 4

HTTP ACCESS enbled by implied rule

Hello all.I noticed that HTTP access to each of nodes in a cluster is enabled by implied rules.Is there a way to disable it? Maybe locally because the customer have 5 clusters under the same Management and I would like to avoid global changes...Below the enabled blades and the log row.Thanks in advance.Regards.Stefano.
HeikoAnkenbrand
HeikoAnkenbrand inside General Topics 6 hours ago
views 2807 22 28

R80 - Top 20 Gateway Tuning Tips

Tip 1 - SecureXL SecureXL is a software acceleration product installed on Security Gateways. SecureXL network acceleration techniques deliver wire-speed performance for Security Gateways. Performance Pack uses SecureXL technology and other innovative network acceleration techniques to deliver wire-speed performance for Security Gateways. The SecureXL device minimizes the connections that are processed by the INSPECT driver. SecureXL accelerates connections on two ways. SecureXL is implemented either in software or in hardware:       SAM cards on Check Point 21000 appliances       Falcon cards (new in R80.20) on different appliances Tuning Tip: From R80.20 SecureXL is always enabled and can no longer be disabled completely. sk98722 - SecureXL for R80.10 and below sk98348 - Best Practices - Security Gateway Performancesk32578 - SecureXL Mechanism sk153832 - SecureXL for R80.20 and above  R80.x - Security Gateway Architecture (Logical Packet Flow)R80.x - Security Gateway Architecture (Acceleration Card Offloading) Tip 2 - SecureXL Connection Templates Feature that accelerates the speed, at which a connection is established by matching a new connection to a set of attributes. When a new connection matches the Connection Template (old name "Accept Template") , subsequent connections are established without performing a rule match and therefore are accelerated. Connection Templates are generated from active connections according to policy rules. Tuning Tip: Accept Templates are enabled by default. sk32578 - SecureXL MechanismPerformance Tuning R80.30 Administration Guide - Connection Templates R80.x - Security Gateway Architecture (Logical Packet Flow)   Tip 3 - SecureXL NAT Templates Using SecureXL Templates for NAT traffic is critical to achieve high session rate for NAT. SecureXL Templates are supported for Static NAT and Hide NAT using the existing SecureXL Templates mechanism. Tuning Tip: Enable NAT Templates depending on the situation. sk71200 - SecureXL NAT Templates  R80.x - Security Gateway Architecture (Logical Packet Flow)   Tip 4 - SecureXL Drop Templates Optimized Drops feature in R76 and above. Heavy load of traffic that should be dropped causes an increase in the Security Gateway's resource consumption. SecureXL Drop Templates are not created, although this option was checked in SmartDashboard. Tuning Tip: Enable Drop Templates depending on the situation sk90861 - Optimized Drops feature in R76 and above sk66402 - SecureXL Drop Templates  R80.x - Security Gateway Architecture (Logical Packet Flow)   Tip 5 - SecureXL Fast Acceleration The Fast Acceleration (picture 1 green) feature lets you define trusted connections to allow bypassing deep packet inspection on R80.20 JHF103 and above gateways. This feature significantly improves throughput for these trusted high volume connections and reduces CPU consumption. The CLI of the gateway can be used to create rules that allow you to bypass the SecureXL PSLXL path to route all connections through the fast path. Tuning Tip: Use this function to exclude IP's or networks from deep inspection. sk156672 - SecureXL Fast Accelerator (fw fast_accel) for R80.20 and above R80.x - Performance Tuning Tip - SecureXL Fast Accelerator (fw ctl fast_accel) Tip 6 - SecureXL Penalty Box The SecureXL penalty box is a mechanism that performs an early drop of packets arriving from suspected sources. This mechanism is supported starting in R75.40VS. The purpose of this feature is to allow the Security Gateway to cope better under high load, possibly caused by a DoS/DDoS attack. A client that sends packets that are dropped by the firewall rulebase or performs violations of the IPS policy is reported to this mechanism. If a client is reported frequently, it would be put in a penalty box. Any packet arriving from this IP address would be dropped by the performance pack at a very early stage. Tuning Tip: Use the SecureXL penalty box if you have DDoS attacks sk74520 - What is the SecureXL penalty box mechanism for offending IP addresses?  R80.x - Performance Tuning Tip - DDoS „fw sam“ vs. „fwaccel dos“   Tip 7 - SIM Affinity Association of a particular network interface with a CPU core (either 'Automatic' (default), or 'Static' / 'Manual'). Interfaces are bound to CPU cores via SMP IRQ affinity setting. SIM Affinity in Automatic mode may make poor decisions on multi-core platforms. In addition, some multi-core hardware platforms suffer from an inability to assign IRQs to use all the CPU cores efficiently. Tuning Tip: In special cases the SIM affinity should be set manually.sk61962 - SMP IRQ Affinity on Check Point Security Gateway sk33250 - Automatic SIM Affinity on Multi-Core CPU Systems Performance Tuning R80.30 Administration Guide – Affinity Settings  Tip 8 - CoreXL CoreXL is a performance-enhancing technology for Security Gateways on multi-CPU-core processing platforms. CoreXL enhances Security Gateway performance by enabling the processing CPU cores to concurrently perform multiple tasks. CoreXL provides almost linear scalability of performance, according to the number of processing CPU cores on a single machine. The increase in performance is achieved without requiring any changes to management or to network topology. On a Security Gateway with CoreXL enabled, the Firewall kernel is replicated multiple times. Each replicated copy, or FW instance, runs on one processing CPU core. These FW instances handle traffic concurrently, and each FW instance is a complete and independent FW inspection kernel. When CoreXL is enabled, all the FW kernel instances in the Security Gateway process traffic through the same interfaces and apply the same security policy. sk98737 – CoreXL sk98348 - Best Practices - Security Gateway Performance R80.x - Security Gateway Architecture (Logical Packet Flow)R80.x - Security Gateway Architecture (Content Inspection)   Tip 9 - CoreXL - Dynamic split of CoreXL FW and CoreXL SND Dynamic split of CoreXL changes the assignment of  CoreXL SND's and CoreXL firewall workers automatically without reboot in R80.40+.  Now, let's assume the CoreXL SNDs are overloaded, a mathematical formula is used to calculate that a further CoreXL SND is added. In this case a CoreXL firewall worker  will not get any new Connections and the connections are distributed to another CoreXL firewall worker. If there are no more connections running through this CoreXL firewall worker, the core will be used for a new CoreXL SND instance. It also works the other way round. Adding and removing a CoreXL firewall worker Adding and removing a CoreXL SND Balance between CoreXL SND and CoreXL firewall worker GAIA 3.10 kernel only Check Point appliances with 8 cores or more Tuning Tip: Use this function from R80.40 on appliances with 8 cores or more. No SK is available yet. R80.40 - Dynamic split of CoreXL    Tip 10 - MultiCore IPsec VPN R80.10 and above introduced MultiCore support for IPsec VPN. Starting in R80.10 Security Gateway, IPsec VPN MultiCore feature allows CoreXL to inspect VPN traffic on all CoreXL FW instances. This feature is enabled by default, and it is not supported to disable it. Tuning Tip: MultiCore IPsec VPN is enabled by default on R80.x gateways. sk104760 - VPN Core sk105119 - Best Practices - VPN Performance sk118097 - MultiCore Support for IPsec VPN in R80.10 and above  Tip 11 - MultiCore Support for SSL Introduced in R77.20, SSL MultiCore feature improves SSL performance of Security Gateway. SSL MultiCore feature is based on Check Point CoreXL technology, which enhances Security Gateway / VSX Gateway performance by enabling the CPU processing cores to concurrently perform multiple tasks. Tuning Tip: MultiCore SSL is enabled by default on R80.x gateways. sk101223 - MultiCore Support for SSL in R77.20 and above  Tip 12 - AES-NI Intel‘s AES New Instructions AES-NI is a encryption instruction set that improves on the Advanced Encryption Standard (AES) algorithm and accelerates the encryption of data in many processor familys. Better throughput can be achieved by selecting a faster encryption algorithm. For a comparison of encryption algorithm speeds. Relative speeds of algorithms for IPsec and SSL. AES-NI is Intel's dedicated instruction set, which significantly improves the speed of Encrypt-Decrypt actions and allows one to increase AES throughput for: Site-to-Site VPN, Remote Access VPN, Mobile Access, HTTPS Interception The general speed of the system depends on additional parameters. Check Point supports AES-NI on many appliances, only when running Gaia OS with 64-bit kernel. On these appliances AES-NI is enabled by default. AES-NI is also supported on Open Servers. Comprised of seven new instructions, AES-NI gives your environment faster, more affordable data protection and greater security. Tuning Tip: Enable AES-NI in the BIOS. sk73980 - Relative speeds of algorithms for IPsec and SSL R80.x - Performance Tuning Tip - AES-NI   Tip 13 - Firewall Priority Queues Packets could be dropped by Firewall when CPU cores, on which Firewall runs, are fully utilized. Such packet loss might occur regardless of the connection's type (for example, local SSH or connection to Security Management Server server). The Firewall Priority Queues are disabled by default. The Priority Queues (PrioQ) mechanism is intended to prioritize part of the traffic, when we need to drop packets because the Security Gateway is stressed (CPU is fully utilized). Tuning Tip: Use it depending on the situation.sk105762 - Firewall Priority Queues in R77.30 / R80.10 and above  Tip 14 - Multi-Queue By default, each network interface has one traffic queue handled by one CPU. You cannot use more CPU cores for acceleration than the number of interfaces handling traffic. Multi-Queue lets you configure more than one traffic queue for each network interface. For each interface, more than one CPU core is used for acceleration. Multi-Queue is relevant only if SecureXL is enabled. Tuning Tip: Enable multi-queueing on 10/40/100 Gbit/s interfaces. Performance Tuning R80.30 Administration Guide – Multi-Queue R80.x - Performance Tuning Tip - Multi Queue   Tip 15 - Dynamic Dispatcher CoreXL is a performance-enhancing technology for Security Gateways on platforms with multiple CPU cores. CoreXL enhances Security Gateway performance by enabling the processing CPU cores to concurrently perform multiple tasks. On a Security Gateway with CoreXL enabled, the Firewall kernel is replicated multiple times. Each replicated copy, or Firewall instance, runs on one processing CPU core. These Firewall instances handle traffic concurrently, and each Firewall instance is a complete and independent Firewall inspection kernel. When CoreXL is enabled, all the Firewall kernel instances in the Security Gateway process traffic through the same interfaces and apply the same security policy. The CoreXL software architecture includes the Secure Network Distributor (SND). The SND is responsible for: Processing incoming traffic from the network interfaces Securely accelerating authorized packets (if SecureXL is running) Distributing non-accelerated packets or Medium Path packets among CoreXL FW kernel instances - this functionality is also referred to as dispatcher Traffic received on network interface cards (NICs) is directed to a processing core running the SND. The dispatcher is executed when a packet should be forwarded to a CoreXL FW instance (in Slow path and Medium path - see sk98737 for details) and is in charge of selecting the CoreXL FW instance that will inspects the packet. In R77.20 and lower versions, traffic distribution between CoreXL FW instances is statically based on Source IP addresses, Destination IP addresses, and the IP 'Protocol' type. Therefore, there are possible scenarios where one or more CoreXL FW instances would handle more connections, or perform more processing on the packets forwarded to them, than the other CoreXL FW instances. This may lead to a situation, where the load is not balanced across the CPU cores, on which the CoreXL FW instances are running. Tuning Tip: Use Dynamic Dispatcher depending on the situation.sk105261 - CoreXL Dynamic Dispatcher in R77.30 / R80.10 and above  Tip 16 - SMT (Hyper Threading) Hyper Threading Technology is a form of Simultaneous Multithreading Technology (SMT) introduced by Intel. Architecturally, a processor with Hyper-Threading technology consists of two logical processors per core, each of which has its own processor architectural state. Each logical processor can be individually halted, interrupted or directed to execute a specified thread, independently from the other logical processor sharing the same physical core. SMT (also called HyperThreading or HT) is a feature that is supported on Check Point appliances running Gaia OS. When enabled, SMT doubles the number of logical CPUs on the Security Gateway, which enhances physical processor utilization. When SMT is disabled, the number of logical CPUs equals the number of physical cores. SMT improves performance up to 30% on NGFW software blades such as IPS, Application & URL Filtering and Threat Prevention by increasing the number of CoreXL FW instances based on the number of logical CPUs. Tuning Tip: Enable SMT on appliances and disable SMT on open server. sk93000 - SMT (HyperThreading) Feature Guide R80.x - Performance Tuning Tip - SMT (Hyper Threading)   Tip 17 - HTTPS Interception vs. SNI With enabled HTTPS interception: If the https interception is enabled, the parameter host from http header can be used for the url because the traffic is analyzed by active streaming. Check Point Active Streaming (CPAS) allow the changing of data, we play the role of “man in the middle”. CPAS breaks the connection into two parts using our own stack – this mean, we are responsible for all the stack work (dealing with options, retransmissions, timers etc.). An application is register to CPAS when a connection start and supply callbacks for event handler and read handler. CPAS breaks the HTTPS connection and others into two parts using our own stack – this mean, we are responsible for all the stack work (dealing with options, retransmissions, timers etc.)  Without enabled HTTPS interception (SNI is used): If the https interception is disabled, SNI is used to recognize the virtual URL for application control and url filtering. It is less resource intensive than HTTPS interception Tuning Tip: Prefer SNI to HTTPS interception, if you only use application control and url filtering. sk108202 - HTTPS Inspection URL Filtering using SNI for HTTPS websites.pdf R80.20 - SNI vs. enabled HTTPS Interception    Tip 18 - Network Interfaces and Server Hardware Only use certified hardware for open server and network cards. Prevent network and packet  errors on the network cards. Tuning Tip: Use supported hardware only and avoid network card issus. HCL R80.x - Performance Tuning Tip - Intel Hardware   Tip 19 - Interface Errors   RX-ERR: Should be zero.  Caused by cabling problem, electrical interference, or a bad port.  Examples: framing errors, short frames/runts, late collisions caused by duplex mismatch.Tuning Tip:  First and easy check duplex mismatch RX-OVR: Should be zero.  Overrun in NIC hardware buffering.  Solved by using a higher-speed NIC, bonding multiple interfaces, or enabling Ethernet Flow Control (controversial).  Tuning Tip:  Use higher speed NIC's or bond interfacesRX-DRP: Should be less than 0.1% of RX-OK.  Caused by a network ring buffer overflow in the Gaia kernel due to the inability of SoftIRQ to empty the ring buffer fast enough.  Solved by allocating more SND/IRQ cores in CoreXL (always the first step), enabling Multi-Queue, or as a last resort increasing the ring buffer size. Tuning Tip:  Use more SND/IRQ cores in CoreXL sk61962 - SMP IRQ Affinity on Check Point Security Gateway sk33250 - Automatic SIM Affinity on Multi-Core CPU Systems Performance Tuning R80.30 Administration Guide – Multi-Queue R80.x - Performance Tuning Tip - Multi Queue   Tip 20 - Elephant Flows (Heavy Connections) n computer networking, an elephant flow (heavy connection) is an extremely large in total bytes continuous flow set up by a TCP or other protocol flow measured over a network link. Elephant flows, though not numerous, can occupy a disproportionate share of the total bandwidth over a period of time.  When the observations were made that a small number of flows carry the majority of Internet traffic and the remainder consists of a large number of flows that carry very little Internet traffic (mice flows). All packets associated with that elephant flow must be handled by the same firewall worker core (CoreXL instance). Packets could be dropped by Firewall when CPU cores, on which Firewall runs, are fully utilized. Such packet loss might occur regardless of the connection's type. What typically produces heavy connections: System backups Database backups VMWare sync. Evaluation of heavy connections (epehant flows)A first indication is a high CPU load on a core if all other cores have a normal CPU load. This can be displayed very nicely with "top". Ok, now a core has 100% CPU usage. What can we do now? For this there is a SK105762 to activate "Firewall Priority Queues".  This feature allows the administrator to monitor the heavy connections that consume the most CPU resources without interrupting the normal operation of the Firewall. After enabling this feature, the relevant information is available in CPView Utility. The system saves heavy connection data for the last 24 hours and CPDiag has a matching collector which uploads this data for diagnosis purposes. Heavy connection flow system definition on Check Point gateways: Specific instance CPU is over 60% Suspected connection lasts more than 10s Suspected connection utilizes more than 50% of the total work the instance does. In other words, connection CPU utilization must be > 30%   Tuning Tip: Check for heavy connections on the situation sk105762 - Firewall Priority Queues in R77.30 / R80.10 and above R80.x - Performance Tuning Tip - Elephant Flows (Heavy Connections)    Tip 21 - KMFW vs. UMFW In “Kernel Mode Firewall” KMFW, the maximum number of running cores is limited to 40 because of the Linux/Intel limitation of 2GB kernel memory, and because CoreXL architecture needs to load a large driver (~42MB) dozens of times (according to the CPU number, and up to 40 times). Newer platforms that contain more than 40 cores e.g., 23900 or open server are not fully utilized. The solution of the problem is a firewall in the user mode of the Linux operating system. USFW “User Space Firewall” or UMFW stands for “User Mode Firewall”, and it is based on proven VSX code. This mode was introduced in R80.10. From a performance point of view I could not see any differences between UMFW and KMFW. I noticed that the process fwk0_dev_0 generates a very high CPU load in the UMFW. My guess as to the purpose of the fwk0_dev_0 is that it acts as the liaison between the multiple fwk firewall worker processes (fw instance thread that takes care for the packet processing) and the single fwmod kernel driver instance and the process for high priority cluster thread. If you want to change the mode from UMFW to KMFW this can be done by changing the registry parameter FwIsUsermode by cpprod_util command. In UMFW the fw instances are threads of the fwk0_dev_0 so by default the top shows all the threads cpu utilization under the main thread. Top has the option to present the utilization per thread as well.   Tuning Tip: R80.10 to R80.30: With less then 35 cores use KMFW and with more then 35 cores use UMFW. sk149973 - How to enable USFW (User-Space Firewall) on a 23900 appliance R80.x - Performance Tuning Tip – User Mode Firewall vs. Kernel Mode Firewall
jijotms0511
jijotms0511 inside General Topics 7 hours ago
views 544 5

ISP Redundancy with PBR

Hi All,Can anyone advise if Checkpoint R80.20 can support ISP redundancy with PBR ( PBR presently configured to connect 2 links for wifi users)Currently ISP redundancy for the main traffic is not configured in the setup and to want to achieve it now? Can anyone advise?Thanks,Jijo 
pmship
pmship inside General Topics 7 hours ago
views 35 2

Couln't save sysctl variables

Hello!Unfortunately i don't know right category for my question... Sorry!I have CheckPoint 600 Appliance with R77.20.20 firmware. There is a proble like https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk106397, but "To view this solution, Advanced access is required"... Pity.I consider that this ploblem seemsed like ARP Flux, so sulution can be "sysctl -w net.ipv4.conf.all.arp_ignore=2", byt this work only before reboot... For a standard linux you should write this config to /etc/sysctl.conf for permanently save. But CheckPoint is not a standard linux, and have no /etc/sysctl.conf (if i've create it, checkpoint dont read that). Whot shoul i do to save "net.ipv4.conf.all.arp_ignore=2" config permanently??? 
Val_Loukine
inside General Topics 8 hours ago
views 44
Admin

TechTalk - R80.40 - Whats New

Join our next TechTalk on 04th March, 2020! In this webinar, @Dima_M  will talk about some of the most exciting features of R80.40:- SmartTasks with pre-defined or customisable actions- Dedicated HTTPS policy layer preventing attacks through encrypted traffic- Revert to Revision- New Migration Tools and more! Register here
Herschel_Liang
Herschel_Liang inside General Topics yesterday
views 49

How to show numbers of concurrent connections & new connections for a specific host?

How to show numbers of active connections & new connections for a specific host? Can it show in CP?
FXE
FXE inside General Topics yesterday
views 217 5

Security Gateway Migration

Hi Guys,I am task to migrate a security gateway purposely for VPN to a new 5600 NGTP with R80.20 OS. I would like to know how to migrate a security gateway, do I still need to do the migrate export and migrate import?Thanks
abdo
abdo inside General Topics yesterday
views 62 1 1

block ip address using web services api call

currently we have  r77.30 which does not support api . To which version should we upgrade to block ip address using web services api call ?thanks
Anna_Ushakova
Anna_Ushakova inside General Topics yesterday
views 4349 12

When you enable HTTPS inspection, gmail does not work.

When you enable HTTPS inspection, gmail does not work. When you open it in Chrome, a gray screen appears. If you disable the HTTPS inspection everything is working correctly. 
beneaton
beneaton inside General Topics yesterday
views 190 6 1

Intermittent VOIP One Way Audio

Hi,I am seeing an issue with intermittent one-way audio / transmission on VOIP calls.Happens every 1 in 6 or 7 calls I'd say.If the issue happens mid-way through the call, logs show as normal/accept/matched to rule 47, etc.The immediate call after that more often than now has OWT from the start - that shows in the logs as an accept, but with the protocol error:" Firewall - Protocol violation detected with protocol:(RTP), matched protocol sig_id:(1), violation sig_id:(9), (500) "The rule it matches with is just Source Network Grp - Destination Network Grp - Any - UDP_4000-60000 and UDP-16000-16511 - Accept - LogAny help appreciated, on whether the above is related/the cause or where to start troubleshooting - Difficult to start with as there is no actual 'drop'.Thanks,Ben
LCarrau808
LCarrau808 inside General Topics Saturday
views 157 9

Same interface for inbound and outbound internal traffic

Hello, I want to perform Access Control and Threat Prevention between the local networks.Description:All networks are connected to a Router, which will detour all traffic to the Security Gateway, even when the destination is direct attached. For the Security Gateway, the inbound and outbound interface is the same in all packets but there is no assymetrical routing. Questions:Will the Threat Prevention and Firewall Blades work without issues on this scenario/layout?Will the SG send to the router a ICMP Redirect Message? Thanks Lanello 
meirh
meirh inside General Topics Friday
views 103 2

10Gb fiber extension cards are not detected by 23500

HelloWe have a new 23500 cluster with r80.10 jumbo take 249.We bought the 23500 appliance with 2 * 10Gb fiber extension cards, one card with 4 nic's and the second with 2.After trying to connect the machine to the network, we saw strange things:- There is a card with 4 * 10Gb ports and the firewall recognize only 2 ports.- the firewall didn't recognized the other extension card untill removed it and connected it again + reboot.- when connecting the firewall to some switch, the switch can see the firewall ports in UP state but ethtool on the firewall shows that everything is down.- when I tried to add and remove some fiber interface from bond group, the firewall rebooted himself..it happened few times. I searched all SK 's and I haven't seen any solution.It seems like a software issue and not faulty hardware.What do you think? Have you seen such a starnge behavior before?. Thank you!.